AtlasIED WTSD-MIX41K Indoor Outdoor 4x1 Analog Wall Mic / Line Mixer
Dante Capable with Optional TSD-DAC2i Audio Network Interface

Model WTSD-MIX41K is a 4x1 Mic/line Analog Mixer that features four balanced microphone/line inputs and a balanced line output. Selection between mic or line level is done via dip wwitch on the rear panel. The high gain mic inputs incorporate user enabled phantom power for condenser microphones and a 120Hz low cut filter to eliminate unwanted low frequency interferences. A global mute function can be triggered via local switch. Separate level controls for each input provide control for the audio mix needed. Input peak and signal indicators give visual reference to set the gain structure for maximum performance.

Mic/line inputs are via a Phoenix type connector on the rear of the WTSD. The WTSD-MIX41K can be converted into Dante®Digital Network audio when interfaced with the optional AtlasIED TSD-DAC2i converter. The WTSD-MIX41K is designed to be used in conjunction with the AtlasIED WTSD-XLR4 input plate or with other XLR wall plates. The WTSD-XLR4 also can be used with the WTSD-COVER accessory for outdoor environments that require security.

Applications:

• Indoor / Outdoor Sports Complexes
• Schools - Gymnasiums, Rally Areas
• Hotels - Ballrooms
• Community Multi-use Facilities
• Industrial Facilities

• Indoor or outdoor use
• XLR balanced mic or line input with individual level controls
• Wall plate mounted, fits into most 2 gang boxes
• Uses industry-standard Cat5/6 wire
• Linkable with other WTSD units on the same bus
• High gain balanced line output for long distance applications up to 400ft
• 120Hz / 12dB low cut filter for mic / line
• Local mute switch
• Remote trigger output for remote amplifier turn on
• System priority mute function
• Input signal & peak indicators
• Energy saving auto sleep mode
• WTSD-XLR4 XLR input plate (optional)
• WTSD-COVER water-resistant stainless locking cover (optional)
• WTSD-PWHUB receiver with limiter and isolated relays and emergency mute (optional)
• TSD-DAC2i Analog to Dante® Digital audio transmitter (optional)

Data Sheet

Manual

• (1) WTSD-MIX41 Mic/Line Mixer
• (1) WTSD-PWBOB Interface
• (1) Power Supply
• Mics Hardware