Commercial Power Amplifiers

The AtlasIED DNA2404DL amplifier is an integral part of the IED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The amplifier features Audinate's Dante digital audio input and four channels of 600W amplification.

The Dynacord IPX10:4 is a dedicated amplifier for fixed install application such as e.g. stadiums, arenas, houses of worship, concert halls, theaters and other applications that require high‑power multichannel amplifiers with sophisticated speaker processing.

The new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology.

The Crest CKd 1204 provides 1,250 watts per channel in four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel.

Offering superb sound quality, the ART SLA-4 studio linear power amplifier delivers the clean power you need for any professional audio application including project or professional studio environments or commercial sound installations.

The QSC SPA4-60 is a powerful yet affordable amplifier designed to meet the audio amplification needs of boardrooms, conference rooms, and other corporate spaces where multiple speakers are in use.

The Ashly TRA-4075 power amplifier is a 4-channel 2 rack space amplifier that is perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation, and no annoying fan noise.

The Ashly TRA-4150 power amplifier is a 4-channel 2 rack space amplifier that is perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation, and no annoying fan noise.

The TOA DA-250F is a 4-Channel Digital Power Amplifier featuring lightweight, compact, high power output, and high efficiency. It delivers 250 W × 4 channels (4 Ω output) using a switching power supply. Each channel is equipped with an independent power section. It can be mounted in an EIA Standard equipment rack (1 unit size).

The Yamaha XMV4280 multi-channel power amplifier combines Class-D efficiency with features designed specifically to benefit commercial installation sound systems.

The Ashly Pema 4125.70 DSP processor features a new sleek look, 4-channel at 125 Watts per channel. The Pema is a matrix mixer with 8-in x 8-out where any input can be assigned to any output or outputs.

This Ashly Pema 4250.70 powered digital signal processor consists of 8 inputs and 4 power amplifier outputs with the ability to assign any input to any output. This DSP paired PEMA amplifier lowers overall system cost, occupies less space, improves energy efficiency, and both speeds and simplifies system installation and programming.

The Ashly nX1.54 Power Amplifier designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.