Commercial Power Amplifiers

The Yamaha PA2120 is easy to setup and features a user-friendly interface for effortless operation. Remote volume control and microphone on/off switching via optional DCP control panels (DCP4V4S, DCP1V4S, DCP4S, max 2 units).

The TOA P-912MK2 900 SERIES power amplifier is great for a wide variety of applications such as public address, paging and music distribution in commercial 70 volt sound systems. One Module Slot accepts TOA plug-in modules for unmatched input flexibility.

The Crown CDi 1000 is a professional two-channel power amplifier designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70V rms/140V rms outputs with accurate, uncolored sound with very low distortion for the best in music and voice reproduction.

The Crown CDi 2000 power amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

The Crown CDi 4000 Power Amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

The Crown CDi 6000 Power Amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

The Crest Audio® UA™-2050 50W utility amplifier provides installers and contractors a cost effective, efficient and inconspicuous solution for background music and paging applications.

The Crest Audio® IPA™-2300 utility amplifier provides installers and contractors the simplest and most efficient solution for background music and paging applications. The IPA-2300 is perfect for grocery stores, restaurants, waiting rooms or any retail space where background music with paging is required.

Learn More

The JBL CSA 1300Z is simple to configure and provides a DriveCore-based sound solution with superb performance.

The Stewart Audio PA-50B is a 2 channel half rack amplifier 25W x 2 @ 8Ω designed to meet the rigorous demands of pro audio installations. The PA series is a proven line of amplifiers with thousands in operation across the world.

The AtlasIED Atmosphere AZA404 four-channel 400W amplifier is designed to interface with the Atmosphere family of products, such as the AZM series of processors. The AZA amplifiers can be configured in pairs to deliver up to 100W per channel into both low and high impedance speaker loads (4Ω/8Ω/70V/100V).

The AtlasIED DPA Series amplifiers feature a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-enabled DPA series amplifiers are DSP controlled 4-channel amplifiers that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.

The Lowell PA250A Power Amplifier provides 250 Watts of continuous RMS power directly to an 8 ohm speaker load. It can be used to increase the power capability of a mixer-amplifier, or it can serve as an all-in-one telephone system paging solution.

The Crown DCi 2|300 amplifier is designed, engineered and manufactured to the industry’s highest quality standards, and provides system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications.

The AtlasIED DPA1202 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA1202 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.

The AtlasIED DPA2402 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA2402 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.

The Crest Audio CLh™ Series power amplifiers set a new standard for performance and efficiency for the contracting and installation market. CLh amplifiers feature an ultra-high efficiency amplifier output circuit that reduces weight while, increasing output power, reliability and thermal efficiency.

The CDi DriveCore 2|600 is a 2-channel amp that offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more.

The new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology.

The Crown CDi DriveCore 2|600BL 2-channel 600W/ch with BLU Link offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more.