Commercial Power Amplifiers
Talk To An Audio Engineer
Commercial Audio Power Amplifiers for paging, 70 volt audio systems and public address sound systems. We carry all commercial audio brands such as, TOA, Atlas Sound, JBL Commercial, QSC Audio, Bose, Denon, Yamaha Commercial Audio, Crown Audio, Bogen, Rolls Audio, Ashly Audio, Peavey, Crest Audio and many more. Made to run 24/7 and last in any challenging environment. Many of our brands offer UL and cUL Listed models and carry up to five-year warranty.
Featuring the latest commercial amp technology from Crown Audio, QSC Audio and Yamaha Commercial Audio offering cutting-edge amplifiers with energy-efficient green power handling. Feature and option rich capabilities for commercial integrators and technicians such as configurable inputs/outputs, multi-channel amplifiers. DSP signal processing, Networkable, Ethernet IP Addressable, CobraNet, Digital Interfaces with recall created settings from built-in front control panels with fast, simple, configuration without a PC. Low impedance (4/8 Ohms) amplification as well as constant voltage amplification with no transformers required, with 25V, 70V and 100V options. The universal switch-mode power supply's with (70 VAC to 240 VAC 50-60 Hz) for installations worldwide. Technology breakthroughs with a balance of robust functionality, Safety Compliance: cTUVus, CE, FCC, RoHS and awesome reliability at a reasonable cost.
When reliability, price and performance are critical - such as in paging and music distribution for retails stores, churches, offices, stadiums, airports, hospital, schools, emergency-evac and industrial public address sound systems, shop Pro Acoustics for your commercial audio needs.
-
Yamaha PA2030a 2-Channel Compact Power Amplifier 70V/100V/4 Ohm/8 Ohm
The PA2030a Power Amplifier features an interface that has been specifically designed for effortless operation.
-
QSC ISA500Ti 2 Channel Commercial Power Amplifier 25, 70, 100 Volt Outputs
The QSC ISA500Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA500Ti a rugged, cost-effective power solution for any permanently installed sound system.
-
Atlas Sound HPA4202 Dual Channel Commercial Amplifier
The Atlas Sound HPA4202 Dual Channel Commercial Amplifier features front panel detented level controls with a security cover, remote turn on, balanced inputs, fault reporting and an accessory card slot for an optional Dante 2-channel digital audio interface.
-
RDL FP-PA35A 35W Mono Audio Amplifier with Power Supply
The RDL FP-PA35A is the ideal choice in many applications where multiple 25V, 70V or 100V speakers in a zone need to be powered from a single audio power amplifier.
List $413.06Price $309.79Savings $103.27 (25%) -
Stewart Audio CVA16-1-CV Single-Channel Dante Subcompact PoE+ Amplifier 16W x 1 @ 70V/100V
The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Stewart Audio CVA40-1-CV-D Single-Channel Dante Subcompact PoE++ Amplifier 40W x 1 @ 70V/100V
The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Crest Audio IPA-2300 300W Utility Amplifier
The Crest Audio® IPA™-2300 utility amplifier provides installers and contractors the simplest and most efficient solution for background music and paging applications. The IPA-2300 is perfect for grocery stores, restaurants, waiting rooms or any retail space where background music with paging is required.
-
Apart Audio REVAMP2060T 2-Channel 2 x 60W Bridgeable 100V Class-D Power Amplifier
The versatile Apart Audio REVAMP2060T is a professional 2-channel digital power amplifier with 2 x 60 watts output power @ 100 volts or @ 4 ohms, that can easily be bridged into a powerful 120 watts @ 100 volts or 8 ohms single amplifier. -
TOA VP-2122 Power Amplifier
The TOA VP-2122 Power Amplifier features a 120 W-by-2 channels configuration, and uses the VP-200VX Power Amplifier Module per channel. -
JBL CSA 1300Z 300W Single Channel Power Amplifier
The JBL CSA 1300Z is simple to configure and provides a DriveCore-based sound solution with superb performance.
-
RDL SF-NP50A Network to 50W Mono Audio Amplifier - 70V or 100V Output
The RDL SF-NP50A is an audio power amplifier that converts one Dante network audio channel and one analog input to a 70V or 100V constant voltage amplified output. The output provides 50 watts for a network digital audio level of 0 dBFS. Special software is not required to configure the module.
List $886.26Price $664.70Savings $221.56 (25%) -
Apart Audio REVAMP2120T 2-Channel 2 x 120W Bridgeable 100V Class-D Digital Power Amplifier
Immaculate sound performance, extremely reliable, maintenance-free this is how we would describe our latest REVAMP2120T. This 2-channel digital power amplifier provides 2 x 120 watts output power @ 100 volts or @ 4 ohms, that can easily be bridged into a powerful 240 watts @ 100 volts or 8 ohm single amplifier. -
Electro-Voice PA1250T Single Channel Power Amplifier 70V/100V 250 Watts 120V or 230V 50Hz-60Hz
The Electro-Voice PA1250T Single Channel Power Amplifier is from the PA series of professional commercial audio amplifiers. The direct path airflow design reduces the heat buildup significantly and allows for more reliable operation in slim two rack space chassis.
-
JBL CSA 2300Z 2-Channel 300W Amplifier
The JBL CSA 2300Z is simple to configure and provides a DriveCore-based sound solution with superb performance. -
Stewart Audio DSP100-1-CV-D Mono DSP and Dante Network Enabled Amplifier
The Stewart Audio DSP100-1-CV-D is an affordable, single-channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante audio.
-
Ashly Audio TRA-2075 2-Channel Mutli-Mode Power Amplifier 2 x 75W @ 4 Ohms
The TRA-2075 power amplifier is an advanced, efficient 2-channel amplifier featuring 75W at 4 ohm. Perfect for Low Impedance, 70V or 100V installations with modest power requirements, they also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution.
-
Dynacord C1300FDI DSP Power Amplifier 1 x 600W @ 70V Bridged with FIR Drive Technology
The Dynacord C1300FDI DSP power amplifier offers high-quality components and truly professional processing power and performance characteristics. Their engineering and applied technologies enable exceptional sound quality with plenty of headroom. The onboard DSP includes multi-band PEQs, crossovers, limiters, and delay per channel. It also has true channel grouping control with extra DSP capabilities like PEQ, GEQ (graphic equalizer), and delay for each group.
-
Stewart Audio DSP100-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 100W @ 4/8 Ohms Dante Network Enabled
The Stewart Audio DSP100-2-LZ-D is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-LZ-D supports Dante™ audio.
-
Ashly Audio TRA-2150 2-Channel Mutli-Mode Power Amplifier 2 x 150W @ 4 Ohms
The TRA-2150 power amplifier is an advanced, efficient 2-channel amplifier featuring 150W at 4 ohm Perfect for Low Impedance, 25V, 70V or 100V installations with modest power requirements, they also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution.
-
Stewart Audio DSP100-2-CV-D DSP Enabled Amplifier
The DSP100-2-CV-D is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. The DSP100-2-CV-D supports Dante™ audio.
-
Atlas Sound HPA602 Dual Channel 600W Commercial Amplifier
The Atlas Sound HPA602 Dual Channel Commercial Amplifier has been designed to be versatile for uses in both commercial 70V / 100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads
-
Stewart Audio FLX-E-80-4-CV 4-Channel DSP Enabled Amplifier 4 x 80W @ 70/100V
The Stewart Audio FLX-E-80-4-CV is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control.
-
Dynacord C1800FDI DSP Power Amplifier 2 x 1250W at 70V with FIR Drive Technology
The Dynacord C1800FDI DSP power amplifier offers high-quality components and truly professional processing power and performance characteristics. Their engineering and applied technologies enable exceptional sound quality with plenty of headroom. The onboard DSP includes multi-band PEQs, crossovers, limiters, and delay per channel. It also has true channel grouping control with extra DSP capabilities like PEQ, GEQ (graphic equalizer), and delay for each group.
-
Atlas Sound DPA602 600W Networkable Multi-Channel Power Amplifier
The AtlasIED DPA Series amplifiers feature a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-enabled DPA series amplifiers are DSP controlled 4-channel amplifiers that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.