Commercial Power Amplifiers

The QSC ISA500Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA500Ti a rugged, cost-effective power solution for any permanently installed sound system.

The Crown CDi 1000 is a professional two-channel power amplifier designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70V rms/140V rms outputs with accurate, uncolored sound with very low distortion for the best in music and voice reproduction.

The Crown CDi 2000 power amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

The Crown CDi 4000 Power Amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

The Ashly Pema 4125 DSP processor features a new sleek look, 4-channel at 125 watts per channel at 4Ω. The Pema is a matrix mixer with 8-in x 8-out, where any input can be assigned to any output or outputs.

The Ashly Pema 4250 DSP Processor is a Protea-Equipped Media Amplifier—either 4-channel at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs. Pema is a digital signal processor.

The Ashly Pema 8125 DSP Processor with it's new sleek look, is a Protea-Equipped Media Amplifier is an 8-channel at 250 Watts or 125 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs.

The Ashly Pema 8250 DSP Processor is a Protea-Equipped Media Amplifier. It features 8-channesl at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs.

The Crown CDi 6000 Power Amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

The Ashly FA-125.2 is designed for easy and flexible placement, to go where other amps cannot: Under conference tables, behind displays, inside kiosks...anywhere high-quality reliable power is needed, but space is limited. The FA Series is that neat audio magic trick that gives your project the performance you need...without the bulk, heat, and power-consumption you don't.

The SoundTube STNet Hub 2 DSP amplifier gives designers and installers an IP-based option for traditional 70V/100V distributed audio systems in small to midsize applications.

The Lab Gruppen LUCIA 120/2 incorporates a digital front end with a 2 x 2 Mix Matrix and comprehensive DSP features.

The Ashly FA-125.4 is designed for easy and flexible placement, to go where other amps cannot: Under conference tables, behind displays, inside kiosks...anywhere high-quality reliable power is needed, but space is limited. The FA Series is that neat audio magic trick that gives your project the performance you need...without the bulk, heat, and power-consumption you don't.

The Ashly FA-125.4 is designed for easy and flexible placement, to go where other amps cannot: Under conference tables, behind displays, inside kiosks...anywhere high-quality reliable power is needed, but space is limited. The FA Series is that neat audio magic trick that gives your project the performance you need...without the bulk, heat, and power-consumption you don't.

The Lab.gruppen LUCIA 240/2 has been designed and engineered for quick installation and easy setup.

The Stewart Audio DSP100-1-CV-D is an affordable, single-channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante audio.

The Dynacord C1300FDI DSP power amplifier offers high-quality components and truly professional processing power and performance characteristics. Their engineering and applied technologies enable exceptional sound quality with plenty of headroom. The onboard DSP includes multi-band PEQs, crossovers, limiters, and delay per channel. It also has true channel grouping control with extra DSP capabilities like PEQ, GEQ (graphic equalizer), and delay for each group.

The Stewart Audio DSP100-2-LZ-D is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-LZ-D supports Dante™ audio.

The DSP100-2-CV-D is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. The DSP100-2-CV-D supports Dante™ audio.

This QSC ISA450 amplifier includes a selectable high-pass filter to protect speakers and prevent speaker transformer saturation with minimal effect on program material. The ISA Series provide additional protection circuitry.

The Stewart Audio FLX-E-80-4-CV is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control.

The Ashly FA-250.4 is designed for easy and flexible placement, to go where other amps cannot: Under conference tables, behind displays, inside kiosks...anywhere high-quality reliable power is needed, but space is limited. The FA Series is that neat audio magic trick that gives your project the performance you need...without the bulk, heat, and power-consumption you don't.