Commercial Power Amplifiers

The Rolls PA202 is a compact class D amplifier. It has 20W per channel stereo @ 4 Ohms and 40W when in bridge/mono mode @ 8 Ohms. The class D low heat design gives this amplifier the ability to be mounted in very tight applications.

The JBL CSA140Z Amplifier goes well beyond what's expected and provides a compact and powerful amplification solution for installed applications.

The RDL TX-PA40D Stereo Audio Amplifier is the ideal choice in many applications where a high quality, high-efficiency utility amplifier is needed to drive a pair of 4 Ω or 8 Ω speakers. It is specifically suited to fixed-gain amplification applications where gain is controlled by other equipment.

The RDL RU-PA40D Stereo Audio Amplifier is the ideal choice in many applications where a high quality, high-efficiency utility amplifier is needed to drive a pair of 4 Ω or 8 Ω speakers. It is specifically suited to amplification applications where users need to adjust the gain.

The JBL CSA240Z Amplifier goes well beyond what's expected and provides a compact and powerful amplification solution for installed applications.

The RDL FP-PA35A is the ideal choice in many applications where multiple 25V, 70V or 100V speakers in a zone need to be powered from a single audio power amplifier.

The SoundTube MA501t is a versatile little mono amplifier for localized amplification in constant-voltage sound systems.

The Bogen Communications C35 is a public address mixer amplifier that provides mixing of microphones, telephone, and auxiliary sources. Output screw terminals are provided for 4-ohm, 16-ohm, 25V and 70V (transformer-coupled) speaker systems. Output jacks let you connect to a tape recorder or an additional booster amplifier, or feed a 600-ohm telephone line when an accessory transformer (Model WMT1A) is used.

The SoundTube SB335 is a versatile, small, class D amplifier engineered for use in localized audio applications designed for use with SoundTube speakers.

The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.

The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.

The RDL SF-NP50A is an audio power amplifier that converts one Dante network audio channel and one analog input to a 70V or 100V constant voltage amplified output. The output provides 50 watts for a network digital audio level of 0 dBFS. Special software is not required to configure the module.

The Biamp Tesira AMP-450BP is a 4-channel PoE+ conferencing amplifier. Capable of mounting directly to the back of the speaker, this amplifier greatly reduces cost by minimizing the cabling between the ceiling devices and the rack room.

With the TOA MA-725F Matrix Amplifier you spend less time and stress for sound operation and more time for your customers. The MA-725F is a 6-input matrix mixer: 4 of its inputs are configured for BGM or other line-level sources, while two balanced inputs are designated for priority sources, such as paging mics or message players.

The Atlas Sound TSD-PA10VG Mono Power Amplifier is a cost effective 10W mono amplifier for 4Ω and distributed constant voltage speaker systems. It is also a good alternative for small projector systems as it can be used with as many as (8) 25/70/100V ceiling speakers (tapped at 1W each), plus the extremely small footprint allows for easy mounting. Learn More

The Atlas Sound TSD-PA20VG Mono Power Amplifier is a cost effective alternative for small projector systems as it can be used with as many as (16) 25/70/100V ceiling speakers (tapped at 1W each), plus the extremely small footprint allows for easy mounting.

The TOA BA-235 is a 35W power amplifier for background music and general announcement. It is suited for use in bars, retail stores, and banquet rooms. When used in conjunction with the optional mixer amplifier BG-220 (20W) or BG-235 (35W), 2-channel broadcast can be made.

The Atlas Sound PA40G Single Channel Power Amplifier provides 40W into a 70.7V/100V line and has a balanced line level input via phoenix connector and a summing unbalanced RCA input.

The Stewart Audio CVA50-1 is built to meet the rigorous demands of high quality commercial, industrial and Pro Audio sound installations. Its low cost and convection cooling make this Class D amplifier flexible for a broad range of applications.