Biamp Voltera A 600.2 Compact 600W Two-Channel Half-Rack Power Amplifier

The Voltera A 600.2 is a compact two-channel half-rack power amplifier with a total output power of 600 watts. The amplifier channels can be individually selected to drive 300 watts per channel into 4 ohm, 8 ohm, 70V, or 100V. Power sharing is also supported, allowing up to 600 watts to be delivered by any channel.

The amplifier also offers a high pass filter at 70 Hz that can be manually switched on and off per output channel, allowing for greater control over the sound output. It supports two analog, line level, balanced inputs, and input and output channels on Euroblock connectors. The amplifier provides LED identification of signal, limiting, and temperature for each channel, and power state and mute all outputs can be controlled via logic inputs, while power state and health can be monitored via logic outputs.

The Biamp Voltera A 600.2 is also designed with convenience in mind, featuring hardware that allows it to be surface mounted onto a wall or under a table. It is half-rack width and can be rack-mounted as a single unit or in pairs, fitting into one rack unit (1U) with the included hardware. The amplifier even includes a standby operation that is enabled when no signal is present, and it leaves the standby state when signal is present again.

Not only is the Biamp Voltera A 600.2 a powerful and versatile amplifier, but it is also CE marked, UL listed, and compliant with the RoHS directive. With a 5-year warranty, the Voltera A 600.2 is a reliable and impressive choice for any professional audio application.

• 600 Watts total output
• 2 channels
• Flexible output channel design supporting 100V, 70V, 8 ohm or 4 ohm per channel
• Each channel can drive up to 600 watts (twice the symmetric power)
• Using the included mounting accessories, the halfwidth design allows single or tandem mounting in 1 RU or mounting in a variety of other locations, including under tables, on walls, behind screens/monitors, in ceilings, and on shelves in credenzas
• Default 4 dBu input sensitivity no matter what load means that it is easy to drive with any source
• Includes manual per-channel configuration: mode switches for Lo/Hi-Z, high-pass filter, and gain trim options. Gain trim can boost both the gain and the power by up to 3dB
• The internal fans required by the high-power capability are thermally controlled and support whisper mode for normal operation
• Includes Tesira processing blocks for applicable Biamp loudspeakers
• Auto standby mode
• CE marked, UL listed, and RoHS compliant
• Covered by Biamp Systems five-year warranty

Data Sheet