- Description
Details
The DA Series multi-channel digital power amplifiers are ideal for multi-zone distributed speaker systems and professional sound applications. Engineered with Class D technology, the new DA Series amplifiers operate at 85 percent efficiency and consume almost one-third less power than conventional analog amplifiers. The compact and lightweight single or dual rack-space design and ultra-low heat dissipation allow designers to rack-mount up to five units without open space between units.
The DA Series is comprised of high and low impedance four-channel models each equipped with an independent power supply for each channel to assure continuous operation and unmatched reliability and performance. Other features include recessed stepped attenuators for precise gain calibration, removable dust filters for easy maintenance, and optional isolation transformer.- Features
Features
- 4x 500W (70V)
- 2x 1000W bridged (140V)
- 4x 550W (8 ohms)
- 4x 100W (4 ohms)
- 2x 1100W (16 ohms)
- Class D design – 85% efficient
- 30% lower power consumption than conventional amplifiers
- Compact, single or dual rack-space design
- Stack up to 5 units without open spaces between units
- Lightweight (14.6 to 19.4 lbs)
- Independent power supply for each channel
- Low heat dissipation
- Recessed stepped attenuators
- Comprehensive protection circuitry
- Removable dust filters for easy maintenance
- Specification
Power Source 120 V AC, 50/60 Hz Amplification System Digital class D Power Consumption 480W (based on UL/CSA standards), 2600W (rated output 8 Ω x 4) Input 4 circuits, +4 dB (1.23 V, input level control in maximum position) Rated Output (4 channels) 500W x 4 (9.8 Ω, 70 V line), 550Wx 4 (8 Ω), 100W x 4 (4 Ω) Rated Output (2 channels - BRIDGE) 1,000W x 2 (19.6 Ω), 1,100W 2 (16 Ω) Rated Output 8.8 mm (0.35") (M4 screw terminal, distance between barriers) Frequency Response 20 – 20,000 Hz (–2 dB, +1 dB): HPF OFF50 – 20,000 Hz (–3 dB, +1 dB): HPF ON Total Harmonic Distortion 0.1% (1 kHz) 0.3% (20 – 20,000 Hz): HPF OFF0.3% (100 – 20,000 Hz): HPF ON Protection Circuit Protection against excessive current flow due to overload, short circuit, unusual DC voltage output S/N Ratio 100 dB (A-weighted) Crosstalk 70 dB (A-weighted) Control Input Power ON/OFF status channels Photocoupler input drive voltage: 9 V DC (Min) – 14 V (Max), 12 V (Typ) Monitor Output Withstand voltage: 30 V DC,control current: under 12 mA Connector RJ45 connector x 2 Connection Cable Category 5 twisted pair cable for LAN (CAT5-UTP) Maximum Cable Distance 600 m (656.17 yd) LED Indicator Power (blue) x 1, Input (green) x 4, Output (yellow) x 4, Peak (red) x 4, Protect (red) x 4 Cooling Forced air cooling Operating Temperature –10°C to +40°C (14°F to 104°F) Operating Humidity Under 90% RH (no condensation) Finish Panel: Aluminum, black, alumite Case: Plated steel sheet Dimensions (H x W x D) 3.48" (88.4 mm) x 18.98" (482 mm) x 15.91" (404.2 mm) Weight 19.4 lbs (8.8 kg) - Documents
Documents
- Reviews
Write Your Own Review