- Description
Details
The TOA P-924MK2 (240 W) Single Channel Power Amplifier is engineered for high performance with wide frequency response, very low noise and distortion and excellent output regulation. A single module slot allows you to easily configure custom configurations using TOA plug-in modules with an extensive array of features and connector types. Outputs include transformer isolated 25 V, 70 V and 8 ohm plus a direct low impedance mode if non-transformer operation is required.
Modular Design - Eight module slots allow you to easily configure custom configurations choosing from over fifty TOA plug-in modules with an extensive array of features and connector types. You can increase the input capacity by connecting a second mixer or mixer/amplifier to the rear-panel Bridge In/Out jack.
Versatile Features - Outputs include transformer isolated 25 V, 70 V and 8 ohm plus a direct low-impedance mode if non-transformer operation is required. Multiple paging priorities are easily configured using optional mute-type modules activated by external switch-closure or mute-send modules. Pre-Out/Power-In jacks allow connection of external signal processing between the mixer and amplifier sections. Other features include protection circuitry, auxiliary output, bass/treble controls and remote master volume terminals. The 900 Series Mixer/Amplifiers are UL and cUL Listed and carry a five year warranty.
- Features
Features
- Modular design allows fast and easy custom configurations.
- Engineered for high performance with wide frequency response, very low noise and distortion and excellent output regulation.
- One Module Slot accepts TOA plug-in modules for unmatched flexibility.
- 60 Watt RMS Output Power.
- 25 V, 70 V and 4/8 Ohm Speaker Outputs with screw terminal connector and protective cover plate.
- Protection Circuitry prevents potential damage from overload, short-circuit, DC offset or overheating.
- Master Volume Control.
- Normal, Peak, Power, Protect, and Signal LEDs provide instantly recognizable status indication.
- Direct Input for connecting an external mixer or recording device.
- 20 dB Input Gain Switch for high or low input levels.
- Low Cut Switch to limit low frequency response.
- Volume Control Security Cover included (1), model YA-920.
- Specification
Output Power 240 W RMS Power Bandwidth (D) 20 - 20k Hz, 0.5% THD; (T) 50 - 20k Hz, 0.5% THD Frequency Response (D) 20 - 20k Hz, ±1 dB; (T) 20 - 15k Hz, ±1 dB(T) 20 - 20k Hz, +1 dB / -3 dB Total Harmonic Distortion 0.01% at 1k Hz, rated output Inputs 1 modular input port,1 direct input, Use only one of direct input or modular input port Input Sensitivity & Impedance Input port: 100 mV or 1000 mV (switchable)/10k Ω Direct input: 100 mV or 1000 mV (switchable)/1 Outputs (T)=Transformer, (D)=Direct Main (T): 8 Ω, 25 V & 70 V, balanced Main (D): 4 Ω, unbalanced Output Regulation (1k Hz) (D): Less than 0.5 dB, no load to full load (T): Less than 1.0 dB, no load to full load Dynamic Range Input level switch in 0 dBV (1000 mV) position: 108 dB Input level switch in -20 dBV position: 90 dB Indicators Normal, Peak, Power, Protect, and Signal LEDs Protection Self-protection, with 2 AC fuses (1 internal)and 2 DC fuses Power Consumption 120V/3A Temperature Range 12° F to 140° F (-10° C to +60° C) Color Black Other Features Output connects approx. 5 seconds after switching power on Dimensions (H xWH x D) 6" (151.3 mm) x 16.5" (420 mm) x 13.2" (334.2 mm) Weight (Without Modules) 43 lbs (19.5 kg) - Reviews
Write Your Own Review