Audio Equipment Racks & Rack Accessories

The Middle Atlantic 28U laminate rack BRK28-22 is a great choice for functionality and good looks on a budget. Made from 3/4" furniture grade MDF board and sporting a high-quality, black, woodgrain, laminate finish.

The Middle Atlantic SBX-7 19" wall mount rack is a convenient, 7U wall rack designed for 19" wide equipment. Its fully-welded construction with 18-gauge steel panels will support up to 75 lbs of equipment. Its locking, front door swings open 180° and deep rail-to-door clearance provides flexibility unlike flush door designs.

The AtlasIED 407-15 assembly provides desk-top access to 19" control and monitor equipment. This model includes a locking rear door with spring-loaded hinges, side vents and optional front door with self-tapping screws.

The Middle Atlantic 12U laminate rack BRK12-28 is a great choice for functionality and good looks on a budget. Made from 3/4" furniture grade MDF board and sporting a high-quality, black, woodgrain, laminate finish.

The AtlasIED 607-15 7RU stand alone basic wall cabinet is a surface mounting wall cabinet used for housing small electronic system installations including 19" wide amplifiers, tuners and associated communication controls for schools, churches, clubs and recreation facilities.

The Middle Atlantic 16U laminate rack BRK16-28 is a great choice for functionality and good looks on a budget. Made from 3/4" furniture grade MDF board and sporting a high-quality, black, woodgrain, laminate finish.

The Middle Atlantic PDLT-815RV-RN is a 1U rack light with 15 amp power distribution and surge suppression status notification. Multifunctional PDLT series rack light and power distribution unit designed to improve rack visibility while powering and protecting the system.

The Atlas Sound 410-15 10RU desktop cabinet rack is a welded rack that provides desk-top access to (19") control and monitor equipment. The 410-15 is 16-gauge CRS and includes one pair of mounting rails, tapped 10-32, hardware and wiring access below rear door or panel.

The Middle Atlantic OSR16 16U rack features a gently sloped rackface to facilitate equipment viewing. Utilizing the same attractive 3/4" oak laminate construction found on the OBRK series, each OSR rack additionally features casters to enhance mobility.

The Middle Atlantic PDLT-815RVA is a 1U rack light with 15 amp power distribution and surge suppression status notification. Multifunctional PDLT series rack light and power distribution unit designed to improve rack visibility while powering and protecting the system.

The Middle Atlantic MW-4FT-380CRM saves you time with four integrated fan tops. Ships assembled, integrated fan tops include 4-1/2" fans, fan guards.

This welded assembly provides desk-top access to (19") control and monitor equipment.

The Atlas Sound ECM-2063 AC Power Distribution Sequencer Raceway was designed to be flexible, incorporating features that allow it to be used in a variety of applications. The sequenced outputs allow equipment to be turned ON or OFF in a particular order.

The Atlas Sound 121-18 21 RU floor rack is 22 5/16" wide, 18 1/2" deep, and contains 21RU vertical panel spaces. The 121-18 cabinet includes one pair of 11-gauge CRS fixed mounting rails.

The Atlas Sound AWR2W-HR 2RU Tilt Out Half Rack Wall Cabinet offers convenient access, lock-in security, and welded construction that can be surface or recessed mounted. It is designed to install within standard 16" stud wall construction, reducing installation time and the need to cut and repair dry wall.

The Atlas Sound AWR2W 2RU Tilt Out Wall Cabinet features convenient access and lock-in security for 19" equipment. This re-designed welded model can be surface or recessed mounted (trim ring included) and include a 3RU panel ­opening above the main bay for connector panels or power distribution.

The Atlas Sound AWR3W-HR 3RU Tilt Out Half Rack Wall Cabinet offers convenient access, lock-in security, and welded construction that can be surface or recessed mounted. The AWR3W-HR is designed to install within standard 16" stud wall construction, reducing installation time and the need to cut and repair dry wall.

The Atlas Sound AWR3W 3RU Tilt Out Wall Cabinet is a features convenient access and lock-in security for 19" equipment. This re-designed welded model can be surface or recessed mounted (trim ring included) and include a 3RU panel ­opening above the main bay for connector panels or power distribution.

The Middle Atlantic EWR-10-17SD 10U wall mount rack is ideal for smaller systems, providing a pivoting, sectional wall mount that can be used in both secured and unsecured areas.

The Gator Rackworks GRW2009509 is a 9U, 21-inch deep hinged wall-mounted rack with a vented glass front door.

The Atlas Sound 124-18 24 is a 24 RU floor rack. The cabinets are welded 16-gauge CRS and assembled for immediate use. Rear doors are hung with quick-release spring hinges which allow them to be rotated 180˚ for right- or left-hand opening.

The Middle Atlantic EWR-12-22 12U equipment rack is a pivoting, sectional wall cabinet that is ideal for use in both secured and unsecured areas.

The economical AtlasIED 221-18 cabinet is 22 5/16" wide, 18 1/2" deep, and contains 21RU vertical panel spaces. The 221-18 cabinet includes one pair of 11-gauge CRS adjustable mounting rails.