- Description
Details
The P-906MK2 (60W) single channel power amplifier is engineered for high performance with wide frequency response, very low noise and distortion and excellent output regulation. A single module slot allows you to easily configure custom configurations using TOA plug-in modules with an extensive array of features and connector types. Outputs include transformer isolated 25V, 70V and 8 ohm plus a direct low impedance mode if non-transformer operation is required. Other features include a direct input, selectable input sensitivity, low-cut switch and protection circuitry. The 900 Series Power Amplifiers are UL and cUL Listed and carry a five year warranty.
- Features
Features
- 900 Series Power Amplifiers are UL and cUL Listed and carry a five year warranty
- Modular design allows fast and easy custom configurations
- Engineered for high performance with wide frequency response, very low noise and distortion and excellent output regulation
- One Module Slot accepts TOA plug-in modules for unmatched flexibility
- 60 Watt RMS Output Power
- 25 V, 70 V and 4/8 Ohm Speaker Outputs with screw terminal connector and protective cover plate
- Protection Circuitry prevents potential damage from overload, short-circuit, DC offset or overheating
Front Panel Features:
- Master Volume Control
- Normal, Peak, Power, Protect, and Signal LEDs provide instantly recognizable status indication
Rear Panel Features:
- Direct Input for connecting an external mixer or recording device
- 20 dB Input Gain Switch for high or low input levels
- Low Cut Switch to limit low frequency response
- Volume Control Security Cover included (1), model YA-920
- Specification
Output Power 60 W RMS Power Bandwidth (D) 20 - 20k Hz, 0.5% THD; (T) 50 - 20k Hz, 0.5% THD Frequency Response (D) 20 - 20k Hz, ±1 dB; (T) 20 - 15k Hz, ±1 dB (T) 20 - 20k Hz, +1 dB / -3 dB Total Harmonic Distortion 0.01% at 1k Hz, rated output Inputs 1 modular input port, 1 direct input, Use only one of direct input or modular input port Input Sensitivity & Impedance Input port: 100 mV or 1000 mV (switchable)/10k Ω Direct input: 100 mV or 1000 mV (switchable)/1 Outputs (T)=Transformer, (D)=Direct Main (T): 8 Ω, 25 V & 70 V, balanced Main (D): 4 Ω, unbalanced Output Regulation (1k Hz) (D): Less than 0.5 dB, no load to full load (T): Less than 1.0 dB, no load to full load Dynamic Range
(Band Pass: 20 - 20k Hz, with Tone Controls centered)Input level switch in 0 dBV (1000 mV) position: 108 dB Input level switch in -20 dBV position: 90 dB Indicators Normal, Peak, Power, Protect, and Signal LEDs Protection Self-protection, with internal AC fuse Power Consumption 100 W Temperature Range 12° F to 140° F (-10° C to +60° C) Color Black Other Features Output connects approx. 5 seconds after switching power on Dimensions (H x W x D) 3.9" (99.1 mm) x 16.5" (420 mm) x 14.1" (358 mm) Weight (without Modules) 20.1 lbs (9.1 kg) - Reviews
Write Your Own Review