Community IC6-1082WR26 High Output 8-inch Two-Way Outdoor Installation Loudspeaker
The I SERIES Compact 600 loudspeakers provide excellent acoustic performance, flexibility and elegant aesthetics for a diverse range of applications. Designed to support systems in need of very compact loudspeakers with exceptional near field fidelity for foreground or background music applications and articulate voice projection with very high output capabilities for fill and distributed applications. I SERIES Compact loudspeakers are engineered to be used alone or integrated with larger systems using I SERIES Point Source (IP) or Subwoofer (IS) models. Optional stainless steel powder-coated U-Brackets provide an easy mounting solution. Multiple attachment points provide compatibility with a variety of third party mounting brackets.
The IC6-2082 is designed for demanding extended high output, high-performance applications without sacrificing fidelity or coverage consistency. Most symmetrical dual 8" 2-way loudspeakers suffer from serious coverage inconsistencies through the crossover region. The IC6-2082 solves this problem by using a very high quality, low distortion 1.7" diaphragm neodymium HF compression driver on a large field-rotatable horn that is crossed over to partially baffled 8" LF drivers at an unusually low crossover frequency. The combination of baffles and low crossover point allows the IC6-2082 to perform similarly to a coaxial loudspeaker, resulting in a consistent, symmetrical, and wide coverage pattern through its operating range. The long-excursion LF drivers and low-velocity port effortlessly extend LF performance at any output level. Additionally, 16 ohm or 70V/100V models expand application flexibility both indoors and out. Multiple attachment points provide compatibility with a variety of Community and third party mounting brackets.
| Operating Mode | Low Impedance or 70V/100V models |
|---|---|
| Operating Environment | Indoor or Weather-Resistant Outdoor |
| Operating Range | 49 Hz to 20 kHz |
| Nominal Beamwidth (H x V) | 120° x 60°, rotatable waveguide |
| Transducers | LF 2 x 8" (203 mm) ferrite driver, 1.5" (37 mm) voice coil HF 1 x 1" (25 mm) exit, 1.7" (44 mm) voice coil, ketone polymer diaphragm, neodymium compression driver |
| Autoformer Taps/Impedance | 70V: 200W, 100W, 50W, 25W; 100V: 200W, 100W, 50W |
| Nominal Sensitivity | @ 1W/1m 99 dB; @ 2.83V 96 dB |
| Nominal Maximum SPL (Whole Space) | Peak 130 dB; Continuous 124 dB |
| Input Connection | (1) Screw terminal block (5-position) |
| Mounting Points | (9) M10 threaded inserts; (4) M8 threaded inserts (rear) |
| Environmental | Outdoor: IP55W per IEC 60529, MIL-STD-810G |
| Accessory | IUB1082 U-Bracket / IVY1082 Vertical Yoke - color matched to cabinet Various third party wall, ceiling and pan/tilt mounts (refer to IC6 IUB/IVY manual for models) |
| Dimensions (H x W x D) | 11.3" (287 mm) x 22.46" (571 mm) x 10.62" (270 mm) |
| Weight | 23.9 lbs (10.8 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
