Community IP6-1122WR26 Medium Power 12-inch Two-Way Outdoor Installation Loudspeaker
I SERIES Point Source 600 weather-resistant loudspeakers provide excellent acoustic performance, modular flexibility and elegant aesthetics for modern performance venues. Designed to support the goals of systems integrators and consultants both acoustically and mechanically, I SERIES includes a wide variety of rotatable coverage patterns and an easily installed U-Bracket that accelerate system design and system commissioning.
FEA-optimized ferrite motors, mechanically mirrored suspension and advanced cooling system combine to provide linear performance with minimal power compression. The custom long-excursion LF driver delivers deep bass response and a detailed midrange at maximum SPL levels. The HF driver delivers excellent sound quality from a hybrid diaphragm of deep drawn titanium and resonance-absorbing polyimide, coupled to a patented low compression, low resonance phase plug for very low distortion performance with abundant headroom.
The rotatable 13-inch (330mm) HF waveguide provides well-defined coverage and a smooth off-axis response that enhances arrayability. Individually voiced crossovers produce proper beamwidth matching transitions and identical sonic signatures, permitting horn patterns to be mixed throughout an installation. Factory-standard passive or optional biamp operating modes further expand performance capabilities.
| Operating Mode | Passive or Biamp with DSP |
|---|---|
| Operating Environment | Indoor or Weather-Resistant Outdoor |
| Operating Range | 37 Hz to 17.5 kHz |
| Nominal Beamwidth (H x V) | 120° x 60°, rotatable waveguide |
| Transducers | LF 1 x 12" (305 mm) ferrite driver, 2.5" (64 mm) voice coil, inherently weather-resistant cone HF 1 x 1.4" (36 mm) exit, 3" (76 mm) voice coil, hybrid titanium/ polyimide diaphragm, ferrite compression driver |
| Continuous Power Handling @ Nominal Impedance | Passive: 69V 600W @ 8 ohms (2400W peak) LF: 63V 500W @ 8 ohms (2000W peak) HF: 24V 75W @ 8 ohms (300W peak) |
| Nominal Sensitivity | Passive: 94dB @ 1W, 94dB @ 2.83V LF: 95dB @ 1W, 95dB @ 2.83V HF: 104dB @ 1W, 104dB @ 2.83V |
| Nominal Maximum SPL | Passive: 128dB peak, 122dB continuous LF: 128dB peak, 122dB continuous HF: 129dB peak, 123dB continuous |
| Input Connection | Indoor: (2) Screw terminal blocks (6-position) Outdoor: Sealed Gland Nut with 12ft (3.6m) 14 Ga. SJOW cable |
| Mounting Points | M10 threaded rigging points - Indoor (15) |
| Environmental | Outdoor: IP55W per IEC 60529 , MIL-STD-810G |
| Accessories | Rigging kits include: BFR22: BalancePoint™ Fly Rails; IUB1122: U-Bracket; IVY1122: Vertical Yoke; IAF40/IAF55: Isometric Array Frames; VAB-BFR38: Sub Above Vert Array; HAB-BFR38: Sub/Dual 2-Way Horiz Array; HSB/VSB: Multiple Splay Brackets for Horiz/Vert Arrays with/without Sub Behind options; DFS: Downfill Splay Kit; DVS-BFR22: Dual Vert Splay Kit with BalancePoint™ Fly Rails; TPK: Tight Pack Kit; IUB1122WRG: Reinforced 304SS U-Bracket (Grey) |
| Dimensions (H x W x D) | 28" (711 mm) x 14.5" (368 mm) x 17.7" (450 mm) |
| Weight | 65 lbs (29.5 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
