Community IP8-1153WR64 High Power 15-inch Three-Way Outdoor Installation Loudspeaker
I SERIES Point Source 800 loudspeakers provide exemplary acoustic performance, modular flexibility and elegant aesthetics for modern performance venues. Designed to support the goals of systems integrators and consultants both acoustically and mechanically, I SERIES includes a wide variety of rotatable coverage patterns and an easily installed U-Bracket that accelerate system design and system commissioning.
FEA-optimized linear suspensions, high-flux neodymium motors, and integral demodulation rings ensure precise control and very low distortion at high SPL levels. The custom long-excursion LF driver delivers deep bass response and a balanced midrange in the most demanding applications. The matched diaphragms on the HF and MF compression drivers provide natural, transparent sound quality with unrivaled intelligibility and transient response accuracy that complements any source.
The rotatable 18-inch (457mm) MF/HF waveguide provides well-defined coverage and a smooth off-axis response that enhances arrayability. The acoustically resultant 8th order MF/HF passive crossover produces a smooth, consistent vertical off-axis response free from the polar lobing and power response losses inherent in other similar systems. User selectable biamp or triamp operating modes expand performance capabilities further.
| Operating Mode | Biamp or Triamp with DSP |
|---|---|
| Operating Environment | Indoor or Weather-Resistant Outdoor |
| Operating Range | 30 Hz to 18.5 kHz |
| Nominal Beamwidth (H x V) | 60°x 40°, rotatable waveguide |
| Transducers | LF – 1 x 15" (381 mm) neodymium motor woofer, 3" (76 mm) voice coil, demodulation ring MF - M200HP, 2" exit, ketone polymer diaphragm, compression driver HF – 1 x 1.4" (36 mm) exit neodymium compression driver, 2.6" (66 mm) voice coil, demodulation ring, ketone polymer diaphragm |
| Continuous Power Handling @ Nominal Impedance | LF: 69V 600W @ 8 ohms (2400W peak) MF: 35V 150W @ 8 ohms (600W peak) HF: 32V 125W @ 8 ohms (500W peak) MF/HF: 47V 275W @ 8 ohms (1100W peak) |
| Nominal Sensitivity | LF: 96dB @ 1W, 96dB @ 2.93V MF: 107dB @ 1W, 107dB @ 2.93V HF: 108dB @ 1W, 108dB @ 2.93V MF/HF: 107dB @ 1W, 107dB @ 2.93V |
| Nominal Maximum SPL | LF: 130dB peak, 124dB continuous MF: 135dB peak, 129dB continuous HF: 135dB peak, 129dB continuous MF/HF: 137dB peak, 131dB continuous |
| Input Connection | (2) Screw terminal blocks (6-position) |
| Mounting Points | (15) M10 threaded rigging points |
| Environmental | Outdoor: IP55W per IEC 60529, MIL-STD-810G |
| Accessories | Rigging kits include: BFR22: BalancePoint™ Fly Rails; IUB1153: U-Bracket; IVY1153: Vertical Yoke; IAF55: Isometric Array Frames; VAB-BFR38: Sub Above Vert Array; HAB3-BFR38: Sub/Dual 2-Way Horiz Array; HSB3/VSB3: Multiple Splay Brackets for Horiz/Vert Arrays with/without Sub Behind options; DFS: Downfill Splay Kit; DVS-BFR22: Dual Vert Splay Kit with BalancePoint™ Fly Rails; TPK: Tight Pack Kit; IUB1153WRG: Reinforced 304SS U-Bracket (Grey) |
| Dimensions (H x W x D) | 39" (991 mm) x 22.1" (561 mm) x 26.3" (668 mm) |
| Weight | 105 lbs (47.6 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
