The MX10 is a stylish and low-profile floor monitor with excellent performance capabilities. Utilizing proprietary coaxial drivers to provide true point-source acoustical output, this compact monitor provides professional performance at an affordable price. Conical waveguides eliminate the transition anomalies that occur in most square and rectangular horns, resulting in exceptionally smooth phase and frequency response curves. Its coaxial design means that all of the sound emanates from the same point source. These innovations reduce feedback, improve intelligibility, and provide uniform coverage.
The MX10 features high sensitivity, permitting the use of smaller power amplifiers to obtain very high output levels. Precision engineered internal crossovers eliminate the need for biamplification, further reducing the overall system cost. Characterized by a smooth, flat frequency response coupled with low distortion, the MX10 provides exceptional resistance to feedback. The Tru-Phase high-frequency waveguide affords precision pattern control to avoid acoustic hot-spots on the stage, thereby greatly simplifying the task of the personnel who mix monitors.
The MX10 is available in a black finish. A single rear Ergo-Grip™ handle offers convenience for portable applications. An optional yoke mounting bracket for flush mounting an MX10 monitor tightly against a wall or ceiling is sold separately. The MX10 monitor is the perfect complement to any of Community’s front-of-house systems.
| Operating Range | 70 Hz to 18 kHz, 90 Hz to 16 kHz (±4 dB) |
|---|---|
| Max Input Ratings (Passive) | 200W continuous, 500W program; 40 volts RMS, 89 volts momentary peak |
| Recommended Power Amplifier | 400W to 600W @ 8 ohms |
| Sensitivity (1W/1m) | 99 dB SPL (125 Hz to 12.5 kHz 1/3 octave bands) 99 dB SPL (250 Hz to 4 kHz speech range) |
| Maximum Output | 122 dB SPL / 129 dB SPL (peak) |
| Nominal Impedance | 8 ohms |
| Minimum Impedance | 5.6 ohms @ 200 Hz |
| Nominal –6 dB Beamwidth | 100° H (+48º / -31º, 500 Hz to 6 kHz); 100° V (+48º / -31º, 500 Hz to 6 kHz) |
| Axial Q / DI | 6.5 / 8.1, 500 Hz to 6 kHz |
| Crossover Frequency | 1 kHz |
| Recommended Signal Processing | 80 Hz high pass filter |
| Drivers | LF (1) 10-inch cone; HF (1) 1.25-inch exit |
| Driver Protection | DYNA-TECH™ driver protection system |
| Input Connection | (2) paralleled NL4-compatible locking connectors internally looped to one 2-terminal barrier strip |
| Handles | (1) Ergo-Grip™ rear pocket handle |
| Finish | Black |
| Dimensions (H x W x D) | 10.8" (275 mm) x 12.6" (321 mm) x 16.5" (419 mm) |
| Weight | 22 lbs (10 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
