The compact 8-inch R.25 combines wide frequency response with excellent efficiency and projection ability. The HF driver is coupled to a nominal 90° x 40° horn, and the HF horn assembly is coaxially mounted with the LF driver to minimize interference at crossover. The horn-loaded LF driver delivers better low-frequency pattern control, higher sensitivity, higher output, and better vocal projection than typical 8-inch two-way loudspeakers. The R.25 is ideal for use in difficult acoustic environments requiring a small footprint, like stadium concourses and gymnasiums, and offers excellent supplemental reinforcement in larger R Series systems.
Applications Include:
| Loudspeaker Type | 2-way, horn loaded, coaxial, weather-resistant |
|---|---|
| Operating Range | 100 Hz to 16 kHz; 160 Hz to 12.5 kHz (±3 dB) |
| Max Input Ratings | 200W continuous, 500W program, 40 volts RMS, 89 volts momentary peak |
| Recommended Power Amplifier | 25W to 200W @ 70V 50W to 200W @ 100V |
| Sensitivity (1W/1m) | 96 dB SPL (160 Hz to 10 kHz 1/3 octave bands) 96 dB SPL (250 Hz to 4 kHz speech range) |
| Maximum Output (200W Tap) | 119 dB SPL |
| Nominal Impedance | 25 ohms |
| Minimum Impedance | 16.2 ohms @ 9 kHz |
| Nominal -6 dB Beamwidth | 90°H (+7° / -13°, 2 kHz to 10 kHz) 40°V (+35° / -10°, 2 kHz to 10 kHz) |
| Axial Q / DI | 13.5 / 11.3, 2 kHz to 10 kHz |
| Crossover Frequency | 2 kHz |
| Recommended Signal Processing | 100 Hz high pass filter |
| Drivers | LF (1) 8" cast frame, Cool-Coil™ HF (1) 3/4" exit, titanium free, Ferrofluid-cooled |
| Driver Protection | DYNA-TECH protection circuitry |
| Input Connection | 16-2 SJOW (12 ft /4 m) |
| Controls | 4 position autoformer TAP select switch 70V switchable taps @ 200W, 100W, 50W, 25W 100V switchable taps @ 200W, 100W, 50W |
| Enclosure | Rotomolded HDPE, light gray color |
| Enclosure Hardware | None |
| Mounting/Rigging Provisions | (5) Rigging points (M8 hardware) 1-3/8" pole mount socket |
| Grille | 16-gauge perforated stainless steel, 3-layer WeatherStop™ grille |
| Required Accessories | 24 dB/Oct high pass filter |
| Supplied Accessories | (1) Stainless steel (304) yoke bracket |
| Optional Accessories | Pole mount system |
| Dimensions (H x W x D) | 11.3" (287 mm) x 11.3" (287 mm) x 13.3" (338 mm) |
| Weight | 23 lbs (10.4 kg) |
| Shipping Weight | 29.1 lbs (13.2 kg) |
Usually arrives in 5-9 business days.
