Open Box. NEW Condition. Authorized Community Dealer. Documentation and Packaging as new product.
The R.35COAX 10" two-way weather-resistant loudspeaker gives system designers increased flexibility by offering vastly improved music playback, additional coverage patterns and higher output in an attractive paintable enclosure. The R.35COAX uses a 1.25-inch exit HF compression drivers, featuring Community's exclusive Tru-Phase phase plug and Carbon Ring Cone Technology. It includes front-loaded LF drivers in highly reinforced enclosures for natural, non-resonant low frequency reproduction, while identical voicing ensures a uniform listening experience.
| Loudspeaker Type | Full-range, two-way, coaxial, weather-resistant |
|---|---|
| Operating Range | 70 Hz to 16 kHz (-10 dB) |
| Frequency Response | 110 Hz to 12.5 kHz (-3 dB) |
| Max Input Ratings | 200W RMS, 400W Program, 40 volts RMS, 80 volts momentary peak |
| Autoformer Taps | 70V: 200W, 100W, 50W, 25W and low impedance, 100V: 200W, 100W, 50W |
| Music | |
| Maximum Output | 120 dB (126 dB peak) |
| Sensitivity (1W/1m) Free Space SPL | 97 dB (125 Hz - 10 kHz), 97 dB (250 Hz - 4 kHz) |
| Nominal Impedance | 8 ohms, 5.9 ohms @ 200 Hz minimum |
| Speech | |
| Maximum Output | 122 dB (128 dB peak) |
| Sensitivity (1W/1m) Free Space SPL | 99 dB (125 Hz - 10 kHz), 99 dB (250 Hz - 4 kHz) |
| Nominal Impedance | 8 ohms, 5.5 ohms@ 5 kHz minimum |
| Nominal Beamwidth (-6 dB) | 90° x 90° , 1.6 kHz to 10 kHz |
| Axial Q / DI | 10/10, 1.6 kHz to 10 kHz |
| Crossover Frequency | 1.3 kHz |
| Recommended High Pass | 70 Hz 24 dB / Octave |
| Recommended Amplifier | 400W to 600W at 8 ohms |
| Coaxial Transducers | |
| Low Frequency | 1 x 10" Carbon ring NeverWet™ treated cone, 2" VC |
| High Frequency | 1 x 1.25" exit compression |
| Physical | |
| Input Connection | NL4 Speakon-type connector for low impedance operation only; and 7-position terminal strip for low impedance or constant voltage operation |
| Controls | Music / speech switch, 70V/100V operation jumper |
| Enclosure | ABS plastic, matte finish, paintable |
| Mounting/Rigging Provisions | Two M8 rigging points, zinc-rich epoxy dual-layer powder-coated yoke, incl. integral safety cable |
| Grille | 3-layer Weather-Stop™ featuring NeverWet™ treated polyester mesh, foam, zinc-rich dual-layer powdercoated perforated steel color-matched to enclosure |
| Input Panel Weather Cover | Color-matched ABS plastic with 13.5 mm ID gland nut installed in .82" knockout |
| Environmental | IP55W per IEC 529 at recommended 5° down-tilt, designed to MIL-STD-810G |
| Dimensions (H x W x D) | 11" (279 mm) x 13" (330 mm) x 13.5" (343 mm) |
| Net Weight | 26 lbs (11.8 kg) |
| Shipping Weight | 32 lbs (14.5 kg) |
Usually arrives in 5-9 business days.
