- Description
Details
The RMG-200A is a complete horn/driver system designed for use in stand-alone voice-range sound reinforcement and announcement / signaling applications.
The RMG-200A provides focused, high output sound projection with predictable performance and exceptional long-term durability.
The horn portion of the assembly is a handcrafted one-piece waveguide, precision molded in hand-laminated, fiber-reinforced fiberglass for optimum performance. With substantial fiberglass layering and integral throat and driver flange construction, the horn is built to withstand substantial torque loads. The inherent strength and rigidity of the fiberglass construction enhances sonic efficiency by preventing sound energy loss, as well as providing inherently weatherproof fabrication.
The compression driver is a high output, high sensitivity loudspeaker that is configured with the diaphragm facing forward, isolating the voice coil and magnetic structure from the environment. The one-piece, non-metallic diaphragm/suspension offers exceptional resistance to the effects of humidity, dust and corrosive atmospheres. The large area, low compression phase plug loading and large magnet structure exhibits extremely low distortion at high outputs while maintaining high efficiency and low power compression.
A fiberglass rear cover protects the driver and transformer from the effects of weather and corrosion.
- Features
Features
- 2 in. (51 mm) throat exit M200A
- Low distortion, high efficiency
- High power output
- Non-metallic diaphragm
- Highly resistant to harsh environments
- Specification
Loudspeaker Type Voice-Range Horn System Operating Range 400 Hz - 4700 Hz500 Hz - 4 kHz (+/-3dB) Max Input Ratings 75W Continuous, 120W Program Recommended Power Amplifier 100W to 140W Sensitivity 1W/1m 115 dB SPL (400 Hz - 4K Hz 1/3 octave bands) Maximum Output 134 dB SPL / 141 dB SPL (peak) Nominal Impedance 11 Ohms Min Impedance 10.8 Ohms @ 1.8kHz Nominal -6dB Beamwidth 50° H (+14° / -9°, 2 kHz - 4kHz)40° V (+10° / -10°, 2 kHz - 4 kHz) Axial Q / DI 35 / 15.4, 2 kHz - 4 kHz Crossover Frequency 500 Hz / 5 kHz Recommended Signal Processing 400 Hz High Pass Filter Drivers MF (1) M200A, Ferrofluid-cooled Input Connection 16 Gauge, 2 conductor, 12'(4m), SJOW Cable Through Gland Nut Enclosure Fiberglass Mounting / Rigging Provisions (4) 1/4" holes at the corners of the horn mouth Required Accessories 400 Hz high pass filter Optional Accessories DSC52 Digital Crossover/Processor Weight 20 lbs / 9 kg Shipping Weight 24 lbs / 10.8 kg Dimensions Specifications Height 9.75 in. / 248 mm Width (front) 17.5 in. / 445 mm Width (rear) 10.5 in. / 267 mm Depth 25 in. / 635 mm - Reviews
Write Your Own Review