Inside the Design

This commercial sound masking system is a simple yet effective speech privacy solution for commercial applications. The included AtlasIED M1000A35 is a self-contained sound masking system for offices that increases speech privacy and enhances workplace acoustics. The addition of four M1000 sound masking suspended speakers means this system can cover a space of up to 1125ft². This system is simple to control via the ATMaskSC attenuator wall plate with a ten-position rotary switch and 1dB precision level adjustments.

Sound System Features:

• Simple & precise level control with wall plate attenuator
• Creates ideal speech privacy spectrum by using non-repeatable pink noise
• Plenum Rated - suitable for use above suspended ceiling systems or open ceiling spaces & approved for use in air handling
• Safety Listed to UL 1480 & UL 2043
  
  

About the System Components

This Atlas sound masking system includes an AtlasIED M1000A35 self-contained sound masking system, four AtlasIED M1000 sound masking speakers, and an Atlas ATMaskSC wall plate attenuator. We’ve also included all the wiring you need to get everything set up.

Not sure if this is the right Sound Masking solution for you?
Call our sales team at (888) 256-4112 or click the Add to Quote button to request a customized sound system that fits your needs.

Atlas Sound M1000A35 8" 5W Class D Powered Sound Masking Speaker with 30W Amplifier:

• UL2043 plenum rated
• Energy efficient
• Efficient wide range 8" speaker
• 5W Class D topology amplifier to power internal speaker
• 30W amplifier external output to feed additional passive speakers
• Separate internal speaker and external output level controls
• Variable hi-cut filter
• External UL rated 24VDC in-line power supply
• Remote level control GPIO port
• 2 removable hanger handles for suspended mounting
• Optional ATMASKSC masking commissioning level control
  
  

Atlas Sound M1000 8" Dual Cone Sound Masking Speakers with 70.7V-4W Transformer and Enclosure:

• Pre-assembled unit includes 8" dia. loudspeaker, transformer, enclosure, baffle, and mounting hardware
• Labor-saving hardware package – complete with new snap hanger assembly, allows quick and easy installation
• Innovative input panel includes combination knock-out and strain relief connector to accommodate flexible or rigid conduit
• Design enables upward, downward, or horizontal orientation
• 734 in enclosure for extended low frequency response
• Available in black or white epoxy finishes to blend with a variety of open ceiling plans
• Suitable for use above suspended ceiling systems or open ceiling spaces approved for use in air handling (plenum ceilings)
• Safety listed to UL 1480 & UL 2043
  
  

Atlas Sound ATMASKSC Sound Masking and Commissioning Precision Level Control:

• Designed to be used with M1000A35
• 1dB steps for precision sound masking settings
• 2 or 3 conductor interface connection
• Works with other 10k Ohm VCA 2 or 3 conductor systems
• Matches stainless steel standard volume wall plate
• Maximum tested distance 500ft, 22-gauge wire

M1000A35 Spec Sheet

M1000A35 Manual

• (1) Atlas Sound M1000A35 8" 5W Class D Powered Sound Masking Speaker with 30W Amplifier
• (4) Atlas Sound M1000 8" Dual Cone Sound Masking Speakers with 70.7V-4W Transformer and Enclosure
• (1) Atlas Sound ATMASKSC Sound Masking and Commissioning Precision Level Control
• (50') West Penn 291 22/2 Non-Plenum Audio Wire
• (100') West Penn 225 16/2 Non-Plenum Audio Speaker Wire