- Description
Details
With the ability to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi 400v enables contractors and system designers to perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier, the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the largest theme park or stadium.
They are perfect as an add-on for your existing CK installation, or for a new project. In addition, all CK series amplifiers are supported by Media Matrix, as well as Crest Audio Nex Sys software giving the consultant or contractor a wide variety of control options.- Features
Features
- 70-Volt Stereo - 200 W.
- Legendary overbuilt power supply.
- Rear-mounted attenuators with removable knobs.
- Euro-style connection block, input and output.
- Front panel labeling area.
- Signal present, active, protect and ACL. LEDs (on front and rear of amplifier).
- PowerSave and sequential turn off (hardwired STO standard on all models).
- Fault I/O for connection to other monitoring systems.
- Specification
Product Type Power Amplifier Output Power, 70.7V 200 Watts Max RMS Output Voltage (each channel) 92 Volts Peak Output Voltage (each channel) 130 Volts Frequency Response (+0 / -0.3dB, 1W/70.7V) 10Hz-20kHz, -3dB @148kHz Power Bandwidth (full power, 1% THD+N) 10Hz - 20kHz, +0/-0.2 dB TourClass Protection ACL,IGM,AutoRamp,short circuit,DC voltage,turnon/off transient,current inrush,sub/ultrasonic input THD+N (rated power, 1kHz) <0.1% @ 70.7V out SMPTE IMD (rated power, 60Hz & 7kHz) <0.1% @ 70.7V out Input CMRR (1kHz) >60 dB Input Sensitivity (rated power) 1.77V @ 70.7V out Standard Voltage Gain X40 (jumper-selectable for X20 or .775V sens.) Input Impedance (balanced/unbalanced) >20k Ohms / >10k Ohms Hum and Noise (“A” weighted, rated power) -105 dB Crosstalk (“A” weighted, rated power) >-60dB Class AB Input Connectors (per channel) Rear-panel barrier strip input Input Connectors (per channel) 4-pin Phoenix sequential turn-on/off connector on standard CC-STL module Output Connectors (per channel) Rear-panel barrier strip output Filter Storage 7,800 μF Power Supply (factory configured) 100V-240V, 50-60Hz Idle Current Draw 120V 0.6A (PowerSave active) 1/8 Power Curr. Draw (typical music, 120V/70.7V) 3.6 A 1/3 Power Curr. Draw (cont. music, 120V/70.7V) 5.1A Max Curr. Draw (breaker rating, 120V/70.7V) 7.0 A Thermal Emissions (1/8 Power, 70.7V) 1304 BTU/hr Thermal Emissions (1/3 Power, 70.7V 1634 BTU/hr Country of manufacture United States Cooling Variable speed, front panel mounted fan, front-to-side airflow Controls 3-position front panel On/Remote/Off switch, two rearpanel channel attenuators Controls AC mains circuit breaker Indicators Signal, ACL (one per ch.) Protect, Active Construction Steel chassis, 16 guage. Double thickness in rack ear areas. Dimensions 89 mm x 483 mm x 435 mm (3.5” x 19” x 17.3) Net weight 30.66 lbs. (13.92 kg.) Gross weight 35.66 lbs. (16.19 kg.) - Reviews
Write Your Own Review
GET RELIABLE FREE SHIPPING* WITH CODE: FREESHIP
*Valid On Orders $199+ & Under 60lbs - Click Here For More Details
Quote 0 item
Recently added item(s) ×
You have no items in your quote.
Cart 0 item
Recently added item(s) ×
Your cart is empty.
Ordering
About Pro Acoustics
We Accept
