Crest Audio Pro 9200 High Performance Dual Channel Power Amplifier

Home /
Crest Audio Pro 9200 High Performance Dual Channel Power Amplifier (Discontinued)

Description

Details

The Pro 200 Series professional power amplifiers offer Crest's renowned sonic integrity while providing exceptionally high power ratings (6500W bridged on the Pro 9200) in a compact, lightweight (under 25 lbs.) 2U package.

The Pro 200 Series amps feature Automatic Clip Limiting (ACL) to protect connected drivers; IGM Impedance Sensing to accommodate varying impedance outputs; tunnel-cooled, high-efficiency heat sinks and variable-speed DC fans to limit the operating temperature and extend amplifier life.

Autoramp
Gradually increases gain to the attenuator level settings when the amplifier is turned on. This prevents abrupt turn-on level. Other protection features include: short circuit, DC voltage, comprehensive thermal management and current in-rush turn-on/off; transient sub-sonic input.

Features

Features

Dramatically reduced net weight
Latest generation of high speed, wide-bandwidth output devices
Dual, variable speed fans
Balanced XLR inputs
Speakon and 5-way binding post speaker outputs
Mode selector switch for stereo, parallel and bridged-mono operation
Input sensitivity selection
Recessed, stepped attenuators
Front panel circuit – breaker switch

Specification

Stereo Power
8Ω	1,300W
4Ω	2,200W
2Ω	3,250W
Bridged Mono Power
8Ω	4,400W
4Ω	6,500W
Output Voltage RMS	113V 8Ω and 4Ω Stereo Power Ratings @1kHz, <0.05% THD+N Both Channels Driven 2Ω Stereo & 4Ω Bridged Mono Power Ratings @1 kHz, <0.1%THD+N
Frequency Response	10 Hz – 100 kHz; +0, -2 dB at 1 watt
Power Bandwidth	10 Hz – 35 kHz; +0, -2 dB at Rated 4Ω Power
Damping Factor	>300:1 8Ω @ 20 Hz to 1kHz
Input CMRR	> -85 dB @1kHz
Gain	Selectable Between x40 (32 dB) and x20 (26 dB)
Input Sensitivity (x40) 4Ω Rated Power +/-3%	2.35 V
Input Impedance	15kΩ Balanced
Hum and Noise A-Weighted @ 8Ω Rated Power	>-113 dB
Crosstalk 1kHz @ 8Ω Rated Power	>-70 dB
Class	H
Power Supply	Switched Mode
Current Draw @ 120 VAC
1/8 Power (4Ω)	2,200W 18.4 A
1/8 Power (2Ω)	3,350W 27.9 A
1/3 Power (4Ω)	5,000W 41.7 A
1/3 Power (2Ω)	7,300W 60.9 A
Thermal Emissions 1/3 Power	24,909 4Ω Bridged BTU/hr
Cooling	Back to Front Via 2 Variable Speed Fans
Input Connectors	Balanced Female XLR
Output Connectors	Speakon® Connectors and Five-Way Binding Post
Controls
Front Panel	Twin Recessed Stepped Attenuators, Circuit Breaker/Power Switch
Rear Panel	Mode Select, Gain Select
LED Indicators	Signal Presence, ACL™ (Active Clip Limiting), Active Status, Temp
Construction	Aluminum Chassis
Dimensions (H x W x D)	3.5" (89 mm) x 19" (483 mm) x 12.25" (311 mm) 13.75" (349 mm) to Rack Ears
Weight	24 lbs (10.9 kg)

Documents