There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.
With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility.
You also have greatly improved control capabilities. The addition of Peakx Plus™ Limiters gives you full command over threshold, attack and release, and we enhanced the Subharmonic Synth so you can easily manage frequency, gain and filter type, allowing for application-specific tuning.
Plus, you'll now be able to tailor fan speed for specific applications and have software visibility of the Power Supply Temperature and AC Line Voltage. Combine all of that with integrated cast-aluminum rack handles for maximum durability and portability and you have the power to move you – and the world.
| Input EQ | 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut |
|---|---|
| Crossover Filters | Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave |
| Output EQ | 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut |
| Delay | For signal alignment of driver; 50 mS of total delay |
| SubHarmonic Synth | Takes the low-frequency content of the input signal and "synthesizes" a new signal |
| Peak Plus Limiter | User defeatable limiter that allows users to control Threshold, Attack, and Release times |
| Presets | 30 total presets, 29 of which are user-definable |
| Sensitivity | 1.4 Vrms |
| Frequency Response | +0 dB, –1 dB (at 1 watt, 20 Hz - 20 kHz) |
| Signal-to-Noise Ratio | 100 dB (A weighted) below rated 1kHz power at 8 ohms |
| Total Harmonic Distortion | < 0.5% |
| Damping Factor 20 Hz to 1 kHz | > 500 |
| Crosstalk | 20 kHz - 1 kHz: > 70 db |
| Input Impedance | 20k ohms balanced, 10k ohms unbalanced |
| Maximum Input Signal | +22 dBu typical |
| AC Line Voltage and Frequency Configurations | 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz |
| AC Line Current | 6.8A; no more than 38W at idle |
| Operating Temperature | 0°C to 40°C at 95% relative humidity (non-condensing) |
| Level | Two front-panel rotary level controls, one for each channel |
| Power Switch | On/Off switch applies AC power to the amplifier |
| Sel/Prev/Next Buttons | Three buttons near the LCD screen that are used to access menu items and front panel lockout |
| LCD Screen | Backlit liquid crystal display that shows preset and processing status |
| Input Connectors | XLR, one per channel |
| Link/Out Connector | Loop-thru signal from input connector for linking another amplifier, one per channel |
| Output Connectors | Two Neutrik Speakon NL4MP output connectors |
| HiQnet USB Connector | Type B, connects to HiQnet network |
| Chassis | Steel |
| Front Panel | Cast-Aluminum |
| Cooling | Proportional speed fan with front-to-rear airflow |
| 2Ω Stereo (per ch) | 700W |
| 4Ω Stereo (per ch) | 275W |
| 8Ω Stereo (per ch) | 215W |
| 4Ω Bridge-Mono | 1400W |
| 8Ω Bridge-Mono | 1000W |
| Dimensions (H x W x D) | 3.5" (88.9 mm) x 19" (482.6 mm) x 12.25" (311.15 mm) |
| Net Weight | 18.5 lbs (8.4 kg) |
| Shipping Weight | 21.5 lbs (9.8 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
