With 12 inputs and 6 outputs and Ethernet control the dbx ZonePro™ 1260 is the newest member of the ZonePro™ family providing a complete suite of signal processing and control for Commercial Audio applications.
Designed to offer superior system sonic performance and flexibility, the 1260 delivers the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePro products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 1260 provides every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePro products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth® function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePro™ every tool is at your disposal to maximize the response of your system.
The ZonePro™ products offer multiple forms of control to further extend the versatility of your system. The addition of Ethernet control means that not only will it work with standard network equipment, but it can also be accessed from remote dialup locations or from wireless access points.
| Analog Inputs | |
|---|---|
| Number of Inputs | 12 Total (2) Switchable mic or line, (8) RCA, and (1) S/PDIF |
| Connectors | Euroblock (Line and Mic), RCA (Source) and RCA (S/PDIF) |
| Type | Electronically balanced, RF filtered |
| Impedance (Euroblock) | > 50k Balanced, >25k Unbalanced, RF Filtered |
| Impedance (RCA) | >25k Unbalanced, RF Filtered |
| Max input line level | +20dBu Mic/Line, +12dBu RCA |
| CMRR | > 40dB, typically >55dB @ 1kHz |
| Mic Pre gain | 30 to 60dB |
| Mic EIN | > 118dB, 22Hz-22kHz, 150 Source Impedance |
| Mic Phantom Power | 15V |
| Analog Outputs | |
| Number of Outputs | 6 |
| Connectors | Euroblock |
| Type | Electronically balanced, RF filtered |
| Impedance | 120 balanced, 60 unbalanced |
| Max Output Level | +20dBu |
| A/D Performance | |
| Type | dbx Type IV™ conversion system |
| Dynamic Range line | >113 dB A-weighted, >110 dB unweighted |
| Type IV dynamic range | >119 dB, A-weighted, 22kHz BW>117 dB, unweighted,22kHz BW |
| Sample Rate | 48kHz |
| D/A Performance: Dynamic Range | 112 dB A-weighted, 109 dB unweighted |
| System Performance | |
| Dynamic Range | >110 dB A-weighted, >107 dB unweighted, |
| THD+N | 0.003% typical at +4dBu, 1kHz, 0dB gain |
| Frequency Response | 20Hz – 20kHz, +/- 0.5dB |
| Interchannel Crosstalk | >80dB typical |
| Crosstalk input to output | >80dB |
| Propagation Delay | 0.6 msec |
| Operating voltage | 100-240 VAC, 50/60Hz |
| Power Requirements | 27 Watts |
| Dimensions (H x W x D) | 1.75" (46 mm) x 19" (483 mm) x 5.75" (146 mm) |
| Weight | 6.8 lbs (3.1 kg) |
| Shipping Weight | 8.8 lbs (4 kg) |
Usually arrives in 5-9 business days.
