The Electro-Voice 309 series loudspeaker systems are two-way loudspeakers with 8-inch low-frequency cones and high temperature voice-coil assemblies coaxially mounted with wide-dispersion cone tweeters. The dual magnet construction allows each speaker to be structurally, magnetically, electrically and mechanically independent of the other. The 309-8A/309-4T/309-8T utilize a single section crossover network, centered at 3,000 Hz, which provides 6 dB of attenuation for the tweeter outside its operating range.
The 309-8T is features a 70.7/100-V line transformer that offers <1 dB insertion loss and a selection of 1-, 2-, 4- and 8-W taps. These components are designed to work together as a complete system of in-ceiling loudspeakers and accessories. They provide wide dispersion, high-efficiency, high- maximum output, ease of installation and wide-range reproduction of music or voice.
Note: This product must be ordered in multiples of 12
| Pressure Sensitivity | 96 dB SPL (1 W, 500 Hz - 3 kHz) re: 20 μPa |
|---|---|
| Frequency Response | 85 Hz - 18 kHz |
| Power-Handling Capacity | 16W |
| Impedance | Nominal: 8 ohms; Minimum: 6 ohms (11 kHz) |
| Maximum Long-Term Output | 108 dB SPL (16 W/1 m) re: 20 mPa |
| Crossover Network | 3,000 Hz with 6 dB-per-octave tweeter protection |
| Input Terminals | 0.212" push terminals |
| Free Air Resonance | 110 Hz |
| Equivalent Volume Compliance, VAS | 0.92 ft |
| Total Q, QTS | 0.94 |
| Electrical Q, QES | 1.16 |
| Mechanical Q, QMS | 5.03 |
| Volume Displacement | 1.61" |
| Reference Efficiency | 2.87% |
| Speaker Frame | 22-gauge stamped steel |
| Dimensions (Dia x H) | 8.13" (206.5 mm) x 3.25" (82.6 mm) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
