- Description
Details
The Electro-Voice EVID FM6.2 loudspeaker system is a complete two-way in-wall loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 6.5" two-way loudspeaker coupled with a 6.5" passive radiator and an internal line-matching transformer. The loudspeaker features 6.5" low-frequency cone and high-temperature voice-coil assembly along with a 6.5" long excursion passive radiator and titanium coated dome tweeter. The EVID FM6.2 loudspeaker utilizes a crossover network, centered at 3,300 Hz, that provides 16-dB-per-octave tweeter protection outside of its operating range. In addition, the FM6.2 features a comprehensive protection circuit to shield the woofer and tweeter drivers from excessive power levels.
The FM6.2 utilizes a transformer that offers a selection of 7.5, 15, 30, or 60 watts delivered to the loudspeaker system using either 70V or 100V lines. The wattage is selected via a convenient switch on the front baffle. The unit can also be operated as an 8-ohm speaker via the same front panel selector switch.
The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel is constructed from heat resistant ABS. The rear enclosure is constructed from zinc-plated, steel. The rear enclosure provides an optimum internal volume, ensuring extended low-frequency performance. It is constructed from heavy-gauge, rugged steel. The steel rear enclosure was optimized using FEA to virtually eliminate panel resonance. The entire enclosure is less than 4" deep providing an easy installation into nearly any tight wall or ceiling space. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker and provides pass through to additional speakers. FM6.2 loudspeakers provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.
- Features
Features
- Shallow profile, ideal for tight wall or ceiling spaces
- Tuned passive radiator extends bass, enhances performance
- High quality 1-inch titanium dome tweeter
- Full-bandwidth overload protection
- 70 V, 100 V, and 8 ohms operation in the same model for off-the-shelf versatility
- Front-panel mode/wattage selector
- Fully-sealed enclosure provides superior isolation to protect adjacent rooms
- Secure Phoenix-style pass-through connectors for easy wiring and installation.
- Four point "quick mounting" tabs for fast attachment in any wall cavity
- Can-mounted transformer for enhanced rigidity
- Ribbed back can eliminates flexing
- Specification
Frequency Response (-3 dB) 60 Hz - 20 kHz Frequency Range (-10 dB) 52 Hz - 20 kHz Sensitivity 90 dB (SPL 1W/1m) Maximum SPL 115 dB Coverage 120° Impedance 8 ohms nominal (transformer bypass) Crossover Frequency 3.3 kHz Rec. Highpass Frequency 60 Hz Power Handling 75W Cont. Prog. / 300W Peak HF Transducer 1" (25.4 mm) LF Transducer 6.5" (165.1 mm) Transformer Taps 70V: 7.5, 15, 30, or 60W
100V: 15, 30, or 60W
Bypass: 8 ohms nominalConnectors 4 pin phoenix style terminals Enclosure Material Baffle: UL 94V-O rated ABS
Backcan: Zinc plated steelGrille Perforated powder coated steel with safety tether Mounting System Integrated toggle anchors Support Hardware Cutout template, Paint shield Dimensions 18.32" (465.4 mm) x 10.09" (256.4 mm) x 3.95" (100.3 mm) Net Weight 12.7 lbs (5.8 kg) Shipping Weight (Pair) 28.4 lbs (12.9 kg) - Documents
Documents
- In The Box
In The Box
- (2) Speaker Systems
- (2) Grilles
- (2) Terminal Connectors (Factory Installed)
- (1) Cutout Template
- (2) Paint Shields
- (1) Service Center Card
- (1) Owner’s Manual
- Reviews
Write Your Own Review