Electro-Voice ID30C-8 8 ohm Compression Driver

Home /
Electro-Voice ID30C-8 Compression Driver - 8 Ohm (Discontinued)

Description

Details

The ID30C-8 is an 8ohm, 30-watt, heavy-duty driver for re-entrant horns. This driver is designed for use in applications that require continuous, high-level, acoustic output such as high-level public address. The ID30C features rugged, weather-resistant, phenolic diaphragms, indoor and outdoor packaging, and a 1", screw-on exit.

The drivers employ rugged phenolic diaphragms, 1.5-inch diameter voice coils and “rim centered” ferrite magnet structures for long life and reliability under extreme operating conditions.

A hinged cycolac rear housing for easy access and connection to a sound system, via a BX conduit connector, is provided together with a plug-in, field-replaceable diaphragm assembly.

Ideal for both indoor and outdoor applications, these drivers are well suited for any installation requiring rugged, medium-power performance.

Features

Features

8 ohms
30-watt heavy-duty driver for reentrant horns
Designed for use in applications that require continuous, high-level acoustic output such as high-level public address
Rugged, weather resistant phenolic diaphragms, indoor/outdoor packaging
1" screw-on exit

Specification

Frequency Response	300-4,000 Hz, ±5 dB
Power Handling, 8 hours, 6-dB crest factor	30 watts (500- to 5,000-Hz pink noise)
Impedance Nominal	8 ohms
Impedance, Minimum, on Cobreflex Horns, Above 500 Hz	7.5 ohms (850 Hz)
Flux Density	1.00 Tesla
Construction	Rugged weatherproof finish for outdoor use
Recommended Horns	Cobreflex IIB, PH, 2WP, SMH, SH
Magnet Material	Strontium ferrite
Voice-Coil Diameter	1.5" (38.1 mm)
Dimensions (Dia x H)	4.2" (106 mm) x 5.2" (132 mm)
Magnet Weight	0.63 lbs (0.28 kg)
Net Weight	3.5 lbs (1.6 kg)
Shipping Weight	4 lbs (1.8 kg)

Documents