The RE27N/D utilizes a revolutionary neodymium-alloy magnet and a reinforced diaphragm dome, a combination offering increased sensitivity (up to 6-dB more output), undistorted output at high sound pressure levels and an extended high-frequency response. The exceptional sensitivity of the RE27N/D, excellent transient response and inherently low noise of the dynamic transducer, all combine to ensure a superior signal-to-noise ratio, easily comparable to the finest condenser cardioid microphones.
The RE27N/D's continuously Variable-D' design reduces bassboosting "proximity effect" to maintain a uniform low-frequency response, up-close or at a distance. Two easily operated bass roll-off switches, offering a sharp low-frequency cut at 200 Hz or a gentle roll-off, are available for special situations where bass attenuation is required. A third switch is available for reducing the high-frequency treble boost.
The true, uniform cardioid polar pattern of the RE27N/D offers the greatest rejection at 180° off axis, insuring superior gain-before feedback. An integral blast and wind filter covers each acoustic opening on the RE27N/D, allowing "close-talk" situations with no worry of "P-pop," breath sounds or excessive sibilance. Part of the filter also shock mounts the internal microphone transducer, reducing the transfer of vibration from external sources. This shock-mount system along with the extremely rugged exterior steel casing allows the RE27N/D to withstand all the rigors of professional use.
| Generating Element | Dynamic N/DYM Magnet Structure |
|---|---|
| Frequency Response | 45 - 20,000 Hz |
| Polar Pattern | Cardioid |
| Impedance | 150 ohms balanced |
| Sensitivity, Open Circuit Voltage | 2.52 mV/pascal = 1 kHz |
| Power Level, 1 kHz (0 dB = 1 mV/Pascal) | -51 dB |
| Hum Pickup Level, typical (60 Hz/1 millioersted field) | -130 dBm |
| Polarity | Pin 2 will be positive referenced to Pin 3 with positive pressure on diaphragm |
| Case Material | Steel |
| Accessories Furnished | 81715 stand clamp |
| Dimensions (H x Diameter) | 8.54" (216.7 mm) x 2.13" (54 mm) |
| Weight | 1.56 lbs (709 g) |
Usually arrives in 5-9 business days.
