Install an M-8Dx into the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. Illuminate your rack with two retractable, front panel lights. Monitor voltage with the digital meter display.
A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. The M-8Dx features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level.The M-8Dx also features a bright red, three-digit LED voltmeter that displays incoming voltage.
| Maximum Output Current | 15 Amps |
|---|---|
| Line Cord | 6 ft, captive, 14 AWG, with 3-conductor Edison plug |
| Lamps | Two 120V Incandescent Bulbs, 4W Each |
| Operating Voltage | 120VAC 60Hz |
| Spike Protection Mode | Line to Neutral |
| Energy Dissipation | 170 Joules |
| Peak Impulse Current | 12,000 Amps |
| Maximum Continuous Opterating Voltage | 130 VAC RMS |
| Let Through Voltage | 400V |
| Noise Attenuation | Transverse mode: Greater than 26dB, 200Khz to 10 Mhz |
| Construction | Steel Chassis, Black Painted |
| Dimensions (H x W x D) | 1.75" (44.45) x 19" (482.6 mm) x 7.5" (190.5 mm) |
| Weight | 5.8 lbs (2.63 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
