Skip to main content
Furman M-8Lx 15A Power Conditioner with Lights (Discontinued)
Furman M-8Lx 15A Power Conditioner with Lights (Discontinued)
By Furman Sound

Furman M-8Lx 15A Power Conditioner with Lights (Discontinued)

Write a Review
Part #:
M-8LX
Model #:
M-8Lx
Availability: No Longer Available
Contact us for comparable solutions.
Certified Audio
Expertise
FREE Custom
System Design
Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112
Email

Get a Quote, Price or Support Fast!

We want to make contacting us as fast and as easy as possible. Please reach out if you have any questions or concerns about our products, system design, technical support, or orders.
Phone Monday - Friday
8:00 AM - 5:00 PM 1-888-256-4112
Email Contact us by email or
our simple form. SEND EMAIL

A Furman M-8Lx is the perfect low-cost AC power solution for any rack mount system setup. This power conditioner installs into the top slot of the racking and provides eight switched outlets located at the rear of the conditioner; protects connected equipment up to a 15-amp load.

Description

A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8Lx into the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8Lx features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level.

Features
  • Noise Filtration
    • AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
  • Surge Protection
    • Spike & surge protection ensures equipment stays safe and your power stays clean
  • 9 Total Outlets
    • 8 rear panel outlets and 1 front panel convenience outlet
  • 15 Amp Rating
    • 15 amp rating, with circuit breaker
  • "Protection OK" Indicator
    • Front panel indicator LED lets you know that your equipment is being protected
  • Wall Wart Spacing Indicator
    • Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters
  • Front Panel Pull-out Lights
    • Two retractable incandescent light fixtures with dimmer control for convenient rack illumination

Specifications
Maximum Output Current 15 Amps
Line Cord 6 ft, captive, 14 AWG, with 3-conductor Edison plug
Lamps Two 120V incandescent bulbs, 4W each
Operating Voltage 120VAC 60Hz
Spike Protection Mode Line to Neutral
Energy Dissipation 170 Joules
Peak Impulse Current 12,000 Amps
Maximum Continuous Opterating Voltage 130 VAC RMS
Let Through Voltage 400V
Noise Attenuation Transverse mode: Greater than 26dB, 200Khz to 10 Mhz
Construction Steel Chassis, Black Painted
Dimensions (H x W x D) 1.75" (44.45 mm) x 19" (482.6 mm) x 7.5" (190.5 mm)
Weight 5.5 lbs (2.49 kg)

DOCUMENTS
!
My Cart