The Furman PL-8 C E brings together superior protection and outstanding performance in a sturdy, rack-mountable design. Furman’s SMP surge suppression virtually eliminates service calls and costly “down time”. Traditional surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system and repair of your surge suppressor. Not so with Furman’s SMP. Damaging transient voltages are safely absorbed, clamped, and dissipated. Your connected equipment is protected, while your Furman protects itself!
This Classic Series power conditioner features Furman’s revolutionary Series Multi-Stage Protection (SMP) circuit, Extreme Voltage Shutdown (EVS), and our exclusive Linear Filtering Technology (LiFT). Together, these technologies comprise precisely what customers have come to expect from Furman - uncompromised AC protection and purification. Furmans Classic Series has been precisely engineered to exceed the critical demands of audio/video professionals, contractors, broadcasters, and musicians alike.
The PL-8C E features Smooth Track LED rack lights which produce virtually no heat and provide an extremely long lifespan. A dimmer control for the rack lights allows the user to adjust the level of illumination (by rotating clockwise/counterclockwise) or switch the lamps on and off (by pushing the knob in). A rear mounted BNC jack accepts any standard (12VAC 0.5 amp) gooseneck lamp for rear rack illumination.
Additionally, the PL-8C E is equipped with a front panel convenience AC outlet and ten rear panel outlets. The PL-8C E’s 10 amp (2300 watt) capacity is supplied from a robust 1.0x3 mil., 2.5 meter detachable AC cord with security clip (IEC C-13 to Schuko is standard, other plug end AC cords are available as an accessory option).
| Maximum Output Current | 10 amps |
|---|---|
| Line Cord | 3/1.0MM AWG, 2.5M cord w/IEC female to 10A Schuko plug |
| Pull-Out Lights | Two multi-LED, dimmable lamps |
| BNC Socket with Switch | Rear rack lamp, 12VAC 500MA maxx (lamp not included) |
| Operating Voltage | 180 to 274 VAC |
| Spike Protection Mode | Line to neutral, zero ground leakage |
| Spike Clamping Voltage | 375 VAC peak @ 3,000 Amps |
| Response Time | 1 nanosecond |
| Maximum Surge Current | 6,500 Amps |
| Noise Attenuation | 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz |
| Power Consumption | 12W |
| Dimensions (H x W x D) | 1.75" (44.5 mm) x 19" (482.6 mm) x 10.5" (266.7 mm) |
| Weight | 13.22 lbs (6 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
