JBL Control 31 2-Way High Output 10" Indoor/Outdoor Monitor Speaker
For Background and Foreground Commercial Sound Applications 250 Watts with 70V 100V 8 Ohm Inputs
The Control 31 utilizes high-power components, computer optimized horn, and a complex network to achieve smooth, powerful high-fidelity performance, extended bandwidth, and well-controlled defined coverage from a compact loudspeaker. The 10" (250 mm) low-frequency driver features a woven fiberglass cone for a high degree of weather capability and pure butyl rubber surround for clean sound quality, a high-temperature fiberglass voice coil former for high sensitivity, high output capability and stable performance under long-term high power working conditions. The optimized cone geometry provides for smooth frequency response and good off-axis performance. A linear suspension spider provides low distortion, while FEA-optimized motor construction produces minimum harmonic distortion. An aluminum coupler ring outside the pole post further reduces distortion and further increases the sensitivity. The high-output high frequency compression driver features a unique patented design, high temperature polymer diaphragm, and fluid-cooling for high output levels with low distortion. The high-frequency waveguide was designed using JBL's advanced ImageControl™ process for accurate, low-distortion control, with smooth frequency response and excellent sound character throughout the frequency band, over the entire listening area. It's 110° x 110° symmetrical coverage, provides the same coverage regardless whether the cabinet is installed in vertical or horizontal orientation. The field-proven top-quality line distribution transformer, designed for minimal insertion loss and reduced saturation, allows for use on either 70V or 100V distributed speaker lines. In the Thru setting, the 8 ohm impedance allows for the use of up to two speakers on a 4-ohm capable amplifier channel. The included InvisiBall mounting method is simple to install, aims easily and provides a high degree of theft deterrence. InvisiBall allows horizontal rotation of up to 41° off-axis and vertical rotation of up to 36° (horn end inward) or 23° (woofer end inward). Attachment points for the optional MTC-30UB (& "-WH" for white) U-bracket allows for compact installation and is particularly useful for low-profile applications.
Weather resistance has been maximized. The low-frequency driver features a woven fiberglass cone, a pure butyl rubber surround, and the basket is rear loaded into the baffle to minimize exposure. The high-frequency compression driver has a highly weather capable polymer diaphragm. The grille is thermoset composite coated and stands up well to UV as well as humidity. The grille is backed with our WeatherMax™ multi-layer foam and tight-weave screening to help prevent incursion of water. The speaker carries an IEC 529 IP-X5 weather rating and exceeds MilSpec 810 standards for humidity, salt spray, temperature, and UV exposure. Nickel/zinc rust-resistant terminals ensure a secure input connection. An MTC-PC2 sealed-entrance cover is included to further protect the speaker's terminals.
Important Note for Marine and Salt-Air Environments: The Control 31 is weather-resistant as supplied, but it is not marine-grade in its standard configuration. For marine, coastal, oceanfront, or other salt-air installations, the optional MTC-30MK Marine Kit Grille (available in black, or MTC-30MK-WH in white) must be added. This kit replaces the standard steel grille with a corrosion-resistant grille designed specifically to prevent rusting in salt-air environments, allowing the Control 31 to be deployed in marine-exposed applications such as docks, marinas, waterfront venues, and pool decks near the coast.
The white-version cabinets are painted with a UV-resistant finish to resist yellowing due to UV exposure. Available in black or white (-WH), the cabinet will accept a variety of paints to match any décor.
