The 150W (600W peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8") driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5") 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance. The Control 50S/T’s included two-piece easy-mount wall-bracket installs quickly: The multi-point wall portion of the bracket attached to the wall and the self-guiding speaker-mounted bracket drops into place for a secure attachment. A cover over the Control 50S/T terminal cup keeps wiring neat. The Control 50S/T is mono. The crossover network built into the subwoofer provides proper signal routing and four satellite output connectors allow connection of the wires for the four Control 52 satellite loudspeakers. A Loop Out connector is also provided on the subwoofer for looping the full-range input signal to other loudspeakers or to other subwoofer/satellite systems.
| Frequency Range (-10 dB) | 32 Hz – 200 Hz |
|---|---|
| Frequency Response (±3 dB) | 50 Hz – 150 Hz |
| Power Capacity | 300W Continuous Pink Noise (2 hrs) 200W Continuous Program Power (100 hrs) 100W Continuous Pink Noise (100 hrs) |
| Nominal Sensitivity (2.83V, 1m) | 95 dB (near corner), 89 dB (center of wall) |
| Rated Maximum SPL (1m) | 115 dB average, 121 dB peak (near corner) 109 dB average, 115 dB peak (center of wall) |
| Nominal Impedance | 8 ohms (in bypass/thru mode) |
| Transformer Taps | 80W, 40W, 20W, (& 10W @ 70V), 8 ohm (in bypass/thru mode) |
| Transducer Driver | 200 mm (8") with polypropylene cone, butyl rubber surround, 38 mm (1.5") 4-layer copper-clad coil, vented aluminum former |
| Input Connectors | Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm) |
| Material | Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal |
| Wall Brackets | 0.9" (2.3 mm) thick zinc-plated and painted cold-rolled steel |
| Dimensions (H x W x D) | 14" (356 mm) x 15.4" (391 mm) x 8" (203 mm) |
| Weight | 20 lbs (9.07 kg) |
| Shipping Weight | 23 lbs (10.2 kg) |
Usually arrives in 5-9 business days.
