- Description
Details
It is intended for use as a flown or ground supported, high power low frequency module used in conjunction with mid/high or full range systems of the PD5000 and PD700 series. The PD5125 will perform well in any application where high output low bass is required.
Low frequency transducers are the 2226H 15" VGC Vented Gap Cooled drivers. They deliver excellent low frequency extension with minimal power compression and low distortion plus high sensitivity and power handling. Large vent area assures minimal port compression and low distortion at high output levels.- Features
Features
- Two high power 380 mm (15 in) low frequency drivers mounted in individual vented chambers
- Low frequency extension to 40 Hz
- Enclosure dimensions compatible with all PD5000 and PD700 models
- Specification
Frequency Range 37 Hz to 2.5 kHz (-10 dB) Frequency Response 42 Hz to 2.1 kHz ( ± 3 dB) Transducer Power Rating (AES) 2000 W (8000 W peak) 2 hrs Long-Term System Power Rating (IEC) 1200 W (4800 W peak) 100 hrs Maximum SPL 50 Hz - 125 Hz 136 dB-SPL cont ave (142 peak) 125 Hz - 800 Hz 135 dB-SPL cont avg (141 peak) supported Maximum SPL high power low frequency module Input Modes Drivers Parallel / Drivers Discrete Nominal Impedance 4 ohms in parallel-drive mode 2 x 8 ohms in discrete drive mode Low Frequency Driver 2 x JBL 2226H 15" VGC drivers with 4" voice coil low frequency transducers Enclosure Trapezoidal with 15 degree side angles Enclosure 0.625" (16 mm) exterior grade 11-ply Finish birch plywood Suspension Attachment 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware Finish Black DuraFlex™ finish. White (-WH) available upon request Grille Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam backing Environmental Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC or WRX Dimensions (H x W x D) 39" (991 mm) x 18.75" (476 mm) x 27.2" (609 mm) Net Weight 118 lbs (53.4 kg) - Reviews
Write Your Own Review
