- Description
Details
The JBL VRX932LA-1 is a light-weight (46 lb / 21 kg) compact 12" two-way line array speaker system designed for use in arrays of up to six units. JBL VRX932LA-1 is the ideal choice when line array performance is needed but the venue size doesn’t call for the very long-throw characteristics of larger line arrays such as JBL’s VERTEC®.
The Constant Curvature waveguide three compression drivers on a continuous arc. When additional JBL VRX932LA-1 speakers are added to the array the uninterrupted arc continues. In effect, all the drivers work together as if they were a single driver on a very long waveguide. Since there are three drivers in each JBL VRX932LA-1, the combined power handling and acoustic output of the system is far greater than a single driver could achieve.
JBL VRX932LA-1 uses “amplitude shading” to shape the coverage of the array. Switches on the input plate allow, for example, the upper box in an array to reach a distant balcony while the lower HF section is shaded back to reduce excessive level at the front of the listening area.
One or two JBL VRX932LA-1’s may also be used on a tripod or over subwoofers. The integral rigging hardware is used to securely lock the array together while the dual-angle pole socket provides aiming flexibility.
As many as six JBL VRX932LA-1 speaker systems may be suspended in a single array for a nominal vertical coverage of up to 90°. Suspended applications require the JBL VRX-AF array frame (available separately). For applications in which the array must be aimed sharply down, a second array frame may be installed to the bottom of the array serving as a pull-back.
JBL VRX918S subwoofers are the ideal choice for a ground-stacked or flown JBL VRX932LA-1 system. The JBL SRX718S subwoofer is also compatible when suspension is not required.
- Features
Features
- JBL’s exclusive neodymium magnet Differential Drive® woofer for high-power capacity and light-weight
- VRX932LA-1 features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design
- Constant Curvature waveguide for unprecedented array coherence
- Dual angle pole socket for aiming flexibility. One or two speakers may be mounted to a 35 mm pole or tripod stand
- Integral rigging hardware for simple connection of enclosures and optional array frame. Arrays of up to six enclosures may be flown
- Array Configuration Selector permits “array shading” in passive mode
- Specification
Frequency Response 57 Hz - 20 kHz (-10 dB); 75 Hz - 20 kHz (±3 dB) Coverage Pattern 100° x 15° nominal Crossover Frequency 1.2 kHz Power Rating Passive: 800 W / 1600 W / 3200 W
Bi-amp LF: 800 W / 1600 W / 3200 WSystem Maximum SPL 130 dB SPL peak (passive mode); LF: 130 dBHF: 139 dB System Sensitivity (1w @ 1m) 95 dB SPL (passive mode); LF: 95 dB (Bi-Amp mode)HF: 114 dB3 (Bi-Amp mode) LF Driver 1 x JBL 2262H 305 mm (12 in) Differential Drive® woofer with neodymium magnet HF Driver 3 x JBL 2408J, 38 mm (1.5 in) voice-coil, neodymium compression driver Nominal Impedance Passive: 8 ohms; Bi-amp LF: 8 ohms; Bi-amp HF: 8 ohms Enclosure 18 mm, 11-ply birch plywood Suspension / Mounting Optional VRX-AF line array frame kit; M-10 Eyebolt Kit Crossover Modes Bi-amp / passive, externally switchable Grille Powder coated, black, 16-gauge perforated steel with acoustically transparent foam Input Connectors Neutrik® Speakon® NL-4 (x2) Finish Black DuraFlex™ finish Dimensions (H x W x D) 13.75 (349 mm) x 23.5" (597 mm) x 15" (381 mm) Net Weight 46 lbs (21 kg) - Reviews
Write Your Own Review