Lab Gruppen IPD 2400 Compact 2400W 2-Channel DSP Controlled Power Amplifier

Home /
Lab Gruppen IPD 2400 Compact 2400W 2-Channel DSP Controlled Power Amplifier (Discontinued)

Description

Details

Lab Gruppen IPD 2400 Compact 2400W 2-Channel DSP Controlled Power Amplifier

Extraordinary flexibility, high power density and competitive cost makes IPD 2400 equally at home whether in permanent installations, portable corporate AV systems, or live PA setups.

Brawn with Brains

Delivering 2 x 1200 W at 4 ohms, IPD 2400 packs reliable power and performance into 1U. At the heart of the IPD platform is a latest-generation DSP engine equipped with up to a total of 40 real-time, multi-slope parametric EQs along with adjustable gain, input and output delay, and both high- and low-pass filters adjustable to any frequency.

The DSP also provides extensive protection for your loudspeaker system, in the form of the innovative software-controlled Speaker Protect Limiter, configured with ease from within IntelliDrive Controller software. Harnessing all of this power is child’s play thanks to the IPD LoadLibrary, a collection of LAB GRUPPEN released presets – for quick configuration and optimization of a wide range of loudspeaker systems, both generic and popular brand models.

Take Control, at the Rack or Anywhere

All setup parameters for input mixing, DSP features and limiter setting are accessible on the front panel using two navigation buttons, a rotary encoder, and the backlit display. Individual channel mute buttons are also available. Up to 100 user-defined presets may be stored on-board.

Most users will also want to take advantage of the advanced, Ethernet-based networked monitoring and control features. Network configuration is fast and foolproof, with automatic discovery and identification of all connected amplifiers. The sleek GUI is designed for touch-based devices, and enables quick grouping of amplifiers along with intuitive setup and preset storage of all DSP parameters.

Features

Features

Compact 2,400 watt, 2-channel amplifier with DSP control for touring applications
Low mains current draw with proven IDEEA technology for power conservation
Highly advanced DSP with 40 real-time multi-slope Parametric EQ's
100 user presets for system configuration and setup
Networked control via IntelliDrive Controller and touchscreen user interface
AES3 and analog inputs with redundant failover
Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection
4-channel input mixer for multi-input mixing and switching
Backlit display with navigation buttons and encoder for front panel setup
Horizontal output VU meters on display in operating mode
Binding post and Neutrik speakON connectors
Universal power supply supports 100 - 240 V at 50 or 60 Hz
Fast network setup with auto-discovery and identification of amplifiers
10-Year Warranty Program
Designed and engineered in Sweden

Specification

Number of Channels	2
Max Total Output All Channels Driven	2400 W
Peak Output Voltage Per Channel	70 Vrms
Max. Output Current Per Channel	20 Arms
Max. Output Power Per Channel (All Channels Driven)
2 Ohms	800
4 Ohms	1200
8 Ohms	600
16 Ohms	300
Performance
THD 20 Hz – 20 kHz for 1 W	<0.1%
THD at 1 kHz and 1 dB Below Clipping	<0.05%
Signal To Noise Ratio	>102 dBA
Channel Separation (Crosstalk) at 1 kHz	>80 dB
Frequency Response	2 Hz – 42 kHz
Input Impedance	18 kOhm
Common Mode Rejection (CMR)	50 dB
Output Impedance	25 mOhm
Gain, Sensitivity and Limiters
SCVPL	100 V peak
Sensitivity for Full Power	6 dBu
Gain (all DSP Controls set to 0dB)	36.2 dBu
Level Adjustment (per Channel)	Software controlled from -inf to 0 dB
Connectors and Buttons
Analog Input Connectors (per ch.)	Neutrik XLR, 3pin female
Analog Input Link Connectors (per ch.)	Neutrik XLR, 3pin male
AES Input Connectors (per ch.)	Neutrik XLR, 3pin female
AES Input Link Connectors (per ch.)	Neutrik XLR, 3pin male
Output Connectors (per ch.)	Neutrik speakON / binding post
Buttons	Power, Menu, Back, Mute (per ch.), Power
Encoder	Adjust / Set
Cooling	Dual fan, front to rear airflow, no filter required, temperature controlled speed
Power
Nominal Voltage	100 – 240 VAC
Operating Voltage	60 – 265 VAC
Standby Consumption	<7.5 W
Mains Connector	IEC inlet (locking)
Dimensions (Rack Rail to Rear Panel)	1.73" (44 mm) x 19" (483 mm) x 10.7" (272 mm)
Dimensions (Overall incl. Handles and Rear Support)	1.73" (44 mm) x 19" (483 mm) x 13.5" (344 mm)
Weight	14.7 lbs (6.2 kg)

Documents