Live Sound Equipment

The TOA Electronics SR-FB3 is designed to be used to suspend the Type H line array speaker.

This wall bracket provides 0 – 10° of positive pitch retention for stacked Bose MA12 and MA12EX arrays. Load rated for triple-stacks. This bracket is used along with the WB-MA12/MA12EX pitch only or WMB-MA12/MA12EX bi-pivot brackets. For indoor/outdoor use.

The Bose WMB-MA12/MA12EX Bi-Pivot Bracket offers pitch and yaw adjustment for MA12 and MA12EX loudspeakers. It is designed for indoor/outdoor use.

As the most critically acclaimed model in the M-Series line, the ATH-M50 is praised by top audio engineers and pro audio reviewers year after year.

The TOA HY-PF1 speaker rigging frame is used to suspend the HX-5 speaker system from the ceiling.

The Bose RMUBRKT1 RMU pan-and-tilt bracket attaches to the rear panel threaded inserts of all RoomMatch® Utility loudspeakers and the FreeSpace FS4SE speaker. It allows both pitch and yaw adjustments to enable flexible mounting options.

The TOA SR-TB3 is a wall tilt bracket designed to install the line array speaker flat against the wall. The downward angle can be set to 0°- 5° and the horizontal angle to up to 15°.

The Galaxy LA4 Portable Line Array is designed to take advantage of the unique sound dispersion characteristics of multiple stacked drivers. It is an unpowered passive 16 ohm Line Array speaker.

The TOA HY-PF7W speaker rigging frame is used exclusively to suspend the HX-7 speaker system from a high ceiling indoors.

Perfect for speech, theater, orchestra and choir sound reinforcement and recording, the U853RW cardioid condenser hanging microphone is equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference.

The Bose WBPWR-50 is an outdoor rated pan-and-tilt bracket that attaches to the rear panel threaded inserts of the RMU208, RMU206 and RMU108 models, as well as the RMU105 and FreeSpace FS4SE speakers.

The Audix ADX40 is a miniaturized condenser microphone designed to hang from an overhead position for applications such as group vocals, choir, theatrical production and room ambience.

The Adaptive Technologies MM-022-BT universal MultiMount speaker mount supports loudspeakers weighing up to 60 lbs/27 kgs, quickly attaching them to walls, ceilings, overhangs, and other structural surfaces. - Speaker not included

The LD Systems MAUI 5 GO BC W replacement battery is purpose-designed for the MAUI® 5 GO to extend the system's operation time. The column element features a 5,200 mAh capacity LG Chem lithium-ion pack that permits 6 hours of full power system performance or up to 10 hours at half power.

The TOA SR-TB4 wall tilt bracket mounts is ideal for indoor use. It is designed to be used exclusively to mount the SR-S4L or SR-S4S line array speaker on a wall. It allows the speaker orientation angle to be adjusted to 5° max. vertically and 20° max. horizontally.

The Electro-Voice RE90H Cardioid Hanging Microphone is a compact hanging-style condenser microphone. It is ideal for choral, instrumental, vocal groups and live theater.

The Electro-Voice RE92H Cardioid Pattern Hanging Microphone is designed specifically for applications where the condenser microphone needs to be suspended from above the sound source. It is ideal for theater, house of worship or any application where a small, high-quality mic needs to be "heard but not seen."