Live Sound Equipment

The ART PB4x4 Power Distribution System has four of the eight rear outputs spaced 1.25 inches apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have eight total power outlets to choose from. Built into the PB 4x4 is a Surge and Spike Protection System, designed to protect powered equipment.

The ART PS4x4 Power Distribution System features a backlit linear meter to monitor input voltage, which gives the user a familiar analog style readout when monitoring voltage from a power source. The PS 4x4 has a backlit linear Ammeter showing Load Current in amperes.

The ART SLA-1 Studio Linear Amplifier is a robust yet compact power amplifier designed for studio or even select live applications. It has been designed and engineered to provide clean, quiet power and excellent sound with ultra-low noise and distortion.

The Art SLA-2 is a studio linear power amplifier capable of delivering 280W per channel (@4 ohms) with an incredible 10Hz to 40kHz frequency response. Ideal for any studio or installation application.

The Art DTI (Dual Transformer/Isolator) is a high quality totally passive audio interface that uses a pair of high-performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise.

The ART ProSplit Transformer Isolated Mic Splitter provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct output to the main or Front-of-House mixer, with the second isolated output being sent to a monitor or recording mixer.

The Art PowerMIX III provides a headphone output with its own level control.

When you need to add 3 mics to a mixer, which only has one available channel, the ART ProMIX Microphone Mono Mixer is your solution. All you have to do is nsert a ProMIX between the mics and the mixer. Each mic channel on the ProMIX has both phantom power and low-frequency cut selectable via DIP switches.

The ART CX311 two-way stereo crossover network has an additional subwoofer output for low-end frequency reinforcement. It employs 24dB/octave state-variable, Fourth-order Linkwitz-Riley filters that guarantee properly phased outputs at all frequencies which is optimal for the proper acoustic summing of common signals from adjacent drivers in the crossover region.

The ART USBMIX6 microphone, instrument, and line mixer/computer interface is a compact versatile audio interface for your computer that converts analog signals from a variety of audio sources to digital audio.

The ART MX821S is a versatile rack mount mixer combining eight independent input channels into a stereo line-level output. Each input channel accepts a balanced XLR microphone input or unbalanced 1/4-inch TS line-level signal and provides independent level and pan controls.

The ART HeadAmp6 is a fully-featured six -channel stereo headphone amplifier that includes six auxiliary inputs to allow separate "more-me" mixes on each headphone channel.

The ART EQ300 Series of graphic equalizers have been designed and engineered to extremely high standards for audio performance and functionality. These innovative, high-quality equalizers are perfect for virtually any audio application where precision frequency tailoring, reliable performance, rugged design, and extremely silent processing is important.

In addition to Sequencing, the ART PS8-II is also a full-featured power conditioner, fast acting breaker, EMI and RFI filter, all while offering surge and spike protection to protect your system. Ideal for use with tube preamps, powered speakers, large displays, and more.

The ART Tube Mix provides a compact versatile audio interface. The Mixer supports two mic inputs, one high Impedance Instrument input, and two line inputs simultaneously. The Tube can be assigned to act as a dual channel tube mic preamp, or stacked and applied to the Instrument input for added warmth and tone with guitar or bass.