Live Sound Equipment

The Whirlwind WP1/2MW Stainless Steel Mounting Wall Plate has 2 Whirlwind WC3M male XLRs.

Ideal for troubleshooting ground problems, this female-to-male XLR 3-pin inline device disconnects pin 1 between the connectors. It isolates the ground of a balanced audio signal without requiring you to cut the cable's shield wire.

The Whirlwind WP1/2FW Stainless Steel Mounting Wall Plate is 2 Whirlwind WC3F female XLRs.

The Whirlwind WP2/4FW Stainless Steel Wall Mounting Plate is a dual gang, 4 Whirlwind WC3F female XLRs wall plate.

The Whirlwind EDB1 Connect Series Direct Box is an imported economy direct box offering rugged construction while maintaining exceptional sound quality.

The Whirlwind ISOXL is a professional quality compact transformer in an XLR male/female tube for quick fix line isolation. The shield is lifted from input to output.

The Whirlwind IMP 2 is a rugged, world-famous DI found in pro systems everywhere. It converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal.

The Whirlwind SPLIT 6 Line Level Parallel Splitter features 1 female XLR input wired to 6 male XLR outputs. Use this handy box when you need to split a line level signal up to 6 times.

The Whirlwind DIRECTOR is a premium direct box that converts an unbalanced line, instrument or speaker level signal to low impedance balanced mic level.

The Whirlwind podDI is a single output summing direct box. Use it to connect CD and MP3 players, computer sound card outputs, DJ mixers, etc. to professional equipment with balanced inputs such as a mixing console. Accepts stereo inputs and sums them into a single mono output.

The Whirlwind SP1X3 provides one direct and two isolated outputs. Each transformer isolated output on these devices features a ground lift switch.

The Whirlwind HOTBOX is an active direct box that operates with batteries or phantom power.

The Whirlwind PL1-420-BK Power Link is designed for live sound reinforcement, AV rental, or any event that requires multiple, industrial-strength power drops.

The Whirlwind pcDI is perfect for interfacing the outputs of CD players, computer sound cards, iPODs® / MP3 players, tape decks, etc. with professional, balanced, low impedance equipment.

The Whirlwind DIRECT2 combines features found on two of the DIRECTOR® direct boxes in one unit. Perfect for converting unbalanced signals from stereo keyboards, acoustic guitar preamps, CD and tape players, computer sound cards, etc.

The Whirlwind HAUC stereo, active, compact headphone amplifier mounts under a table or counter and provides headphone volume control for broadcast applications, recording studios, language labs, etc.

The ISO-2 is a two channel isolation box and line balancer. As an isolation unit, use it to isolate lines to press and video feeds or on-stage power amps. It's a handy hum and buzz fighter for broadcast or live sound applications.

The Whirlwind podMIX is a passive mixer that combines a microphone with a stereo, line-level audio source and reduces them to mic level for connection to a single-channel input of a sound system.

The Whirlwind PW-1 is a high powered stereo headphone driver for use with on stage in-ear monitoring systems. The PW-1 is a hardwired beltpack unit that has left and right balanced, line level XLR inputs. Features include a protective peak limiter with adjustable threshold, a stereo/mono switch and an additional 3.5mm stereo input.

Whirlwind PL1-420-GFI Power Link Portable Power Distribution Outlet Box with (2) Hubbell 20A GFI receptacles, (1) 20A Neutrik Powercon inlet and (1) 20A Neutrik Powercon outlet.

The Whirlwind PA-1 is a high output, low distortion, portable monitoring device suitable for critical listening in any professional audio environment. The PA-1 accepts either balanced or unbalanced stereo, line-level signals through parallel XLR and 1/4" TRS inputs.

Constructed of 11 gauge steel, the Whirlwind FP-1 permits flush installation for safe, reliable connections. Each unit incorporates a black carpet trim ring with a beveled edge.