Live Sound Equipment
-
NEXO NXAMP4X1MK2 4x1 Powered TD Controller 4x600W @ 8 Ohms with DSP
Rated at 4 x 1300 Watts @ 2 Ohms, the NXAMP4X1MK2 combines advanced signal processing with four state-of-the-art Class D amplifiers to create a flexible, light-weight powering and control solution for NEXO loudspeaker systems.
-
Community ALC-1604D 4-Channel x 1600W Amplified Loudspeaker Controller with DSP and Dante
Community's line of Amplified Loudspeaker Controllers (ALC) offers factory-optimized DSP processing, protective limiting and amplification, as well as signal routing, zone switching, and remote monitoring for virtually any Community loudspeaker application.
-
K-Array KMT21 Mark I Ultra Light High Power 21 inch Subwoofer
The K-Array KMT21 Mark I is much more than a standard 21” powered subwoofer. The amplifier mounted on board is Class D, delivering 2 x 2000W at 4 Ohm. The unique four-corner port configuration gives symmetrical back loading to the speaker for extended bass response with very low distortion.
-
NEXO NXAMP4X2MK2 4x2 Powered TD Controller 4x1200W @ 8 Ohms with DSP
Rated at in 4 x 2500 Watts, the NXAMP4X2MK2 combines advanced signal processing with four state-of-the-art Class D amplifiers to create a flexible, light-weight powering and control solution for NEXO loudspeaker systems.
-
K-Array KH2 Digitally Steerable Acoustics Powered Line Array Speakers
Research conducted over 10 years which was used to develop the next generation of touring systems, the Firenze Series, has also been applied to the new line of K-array speakers, the Concert Series.
-
Dynacord TGX10 4 x 2500W DSP Power Amplifier
The Dynacord TGX10 4‑channel live sound amplifier is one of the most powerful on the market and represents the pinnacle of pro audio electronics engineering.
-
NEXO NXAMP4X4 4 x 4 Powered TD Controller 4 x 1900W @ 8 Ohms
The NEXO NXAMP4x4 uses advanced custom components based power amplifier design, the ultimate evolution of the Yamaha's EEEngine technology, offering the sonic purity of conventional class AB but a heat dissipation equaling the class D.
-
MIDAS PRO1 Live Digital Console with 48 Input Channels, 24 Midas Microphone Preamplifiers and Touring Grade Road Case
The PRO1 breaks new ground for MIDAS digital consoles, featuring an all-new, lightweight aluminum frame.
-
Dynacord TGX20 4 x 5000W DSP Power Amplifier
The Dynacord TGX20 4‑channel live sound amplifier is one of the most powerful on the market and represents the pinnacle of pro audio electronics engineering.
-
EAW RADIUS RSX Line Array Package
Customizable EAW RADIUS Line Array packages. Optimal sonic performance has never been easier or more accessible, and system design and control has never been more approachable.
-
Bose PowerMatch PM8250N 8-Channel Configurable Power Amplifier with Ethernet Network Control
The Bose PowerMatch PM8250N is a configurable professional power amplifier which provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems.
-
Bose PowerMatch PM8500N 8-Channel Configurable Power Amplifier with Ethernet Network Control
The Bose® PowerMatch® PM8500N Configurable Power Amplifier adds Ethernet connectivity for network control and monitoring of multiple “N” version amplifiers.
-
RCF XPS 16KD 4 x 4000W Dante-Equipped DSP Power Amplifier
The RCF XPS 16KD is a four-channel power amplifier with advanced processing and advanced routing with Dante, digital and analog I/O for both touring and install use. With 4x4000W Class D continuous power at 2.7 ohms, 40-bit floating-point processing at 96 kHz, and 32-bit internal routing, XPS 16K packs extreme power density in a 2U chassis. -
RCF XPS 16K 4 x 4000W DSP Power Amplifier
The RCF XPS 16K is a four-channel power amplifier with advanced processing and analog/digital routing options for both touring and install use. With 4x4000W Class D continuous power at 2.7 ohms, 40-bit floating-point processing at 96 kHz, and 32-bit internal routing, XPS 16K packs extreme power density in a 2U chassis.