Accessories

The TOA HY-CN7W-WP is used to join 2 HX-7W-WP speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies.

The TOA HY-CN7B-WP is used to join 2 HX-7B-WP speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies.

The Gator GFW-SPKW-M100W is a speaker wall mount that can hold speakers weighing up to 100 lbs (45 kg). It features multi-angle adjustability and a foam-padded base plate to protect your speakers.

The Ultimate Support PRO-R-T-T Pro Series R standard height microphone stand features a reinforced plastic tripod base, a telescoping boom, and a patented quarter-turn clutch.

The TOA SR-WB3 is a wall mounting bracket designed to install the line array speaker flat against the wall.

The On-Stange Stands SS7322B adjustable wall mount speaker bracket is ideal for sound contractors, mount this bracket on the walls at nightclubs, recording studios, home multi-media rooms, schools or just about anywhere! For mounting on flat surfaces, this adjustable bracket features a tilting angle adjustment.

The TOA HY-WM2 Speaker Mounting Bracket is used exclusively to mount the HX-5 series speaker system closely to a wall or ceiling. The bracket helps to achieve clearer sound reproduction by minimizing phase interference generated by sound waves reflecting from walls or ceilings. This bracket is designed for indoor use.

The Genelec 8000-402B is an adjustable wall bracket that fits all 8000 series speakers. It is available in a black or white finish.

The Electro-Voice EVOLVE50-PL-SB is a 160 mm short column speaker pole for EVOLVE 50 systems.

The Atlas Sound SMA15CBRKT-B is a surface mount bracket designed for use with SMA-15 and SMP-15 loudspeaker systems.

The Tannoy YOKE HORIZONTAL VX 8.2 accessory bracket provides tilt rotation in the long axis of VX 8.2 loudspeakers for accurate audience coverage and boasts a safety factor of 10:1 allowing unparalleled installation security.

The TOA Electronics SR-FB3 is designed to be used to suspend the Type H line array speaker.

The EZ-HK1 is a superior-quality stereo audio transformer isolation module for use with unbalanced, high impedance audio inputs. Input and output connections are provided on gold-plated RCA jacks.

This wall bracket provides 0 – 10° of positive pitch retention for stacked Bose MA12 and MA12EX arrays. Load rated for triple-stacks. This bracket is used along with the WB-MA12/MA12EX pitch only or WMB-MA12/MA12EX bi-pivot brackets. For indoor/outdoor use.

The Electro-Voice MB300 horizontal array kit contains two brackets and eight of each of the following: 5 / 16-18 x 1 hex-head bolts, 5 / 16 lock washers, 5 / 16-18 nuts. The MB300 is used in conjunction with the MB200 installation bracket to create a speaker array.

These On-Stage Stands MSP7703 EuroBoom mic stands boast hybrid sheet metal and composite leg housings, making them virtually unbreakable. With removable boom arms and their ability to fold flat, these stands are a must for every band.

The Bose WMB-MA12/MA12EX Bi-Pivot Bracket offers pitch and yaw adjustment for MA12 and MA12EX loudspeakers. It is designed for indoor/outdoor use.

The Bose WMB-MA12/MA12EX Bi-Pivot Bracket offers pitch and yaw adjustment for MA12 and MA12EX loudspeakers. It is designed for indoor/outdoor use.