Speaker Brackets & Mounts

The TOA SR-WB3 is a wall mounting bracket designed to install the line array speaker flat against the wall.

The Bose® CB-MA12EX Coupling Bracket is designed for stacking two or more of the MA12EX loudspeakers.

The Bose® CB-MA12EX Coupling Bracket is designed for stacking two or more of the MA12EX loudspeakers.

The On-Stange Stands SS7322B adjustable wall mount speaker bracket is ideal for sound contractors, mount this bracket on the walls at nightclubs, recording studios, home multi-media rooms, schools or just about anywhere! For mounting on flat surfaces, this adjustable bracket features a tilting angle adjustment.

The Gator GFW-SPKW-M100W is a speaker wall mount that can hold speakers weighing up to 100 lbs (45 kg). It features multi-angle adjustability and a foam-padded base plate to protect your speakers.

The TOA HY-WM2 Speaker Mounting Bracket is used exclusively to mount the HX-5 series speaker system closely to a wall or ceiling. The bracket helps to achieve clearer sound reproduction by minimizing phase interference generated by sound waves reflecting from walls or ceilings. This bracket is designed for indoor use.

The Atlas Sound SMA15CBRKT-B is a surface mount bracket designed for use with SMA-15 and SMP-15 loudspeaker systems.

The TOA Electronics SR-FB3 is designed to be used to suspend the Type H line array speaker.

The Electro-Voice ZLX-BRKT wall mount bracket is designed for use with all of the ZLX Series loudspeakers.

The On Stage Stands SS7914B wall mount speaker bracket is ideal for sound contractors. Mount this bracket on walls at night clubs, recording studios, home multi-media rooms, schools or just about anywhere! With the included adapter sleeve, this wall mount makes for a universal fit: 1-3/8" - 1-1/2".

The all-steel On-Stage Stands SS7990 speaker wall mounts provide 180 degrees of steering, 80 lbs per mount capacity and comes complete with multiple tie points for tilting options, mounting hardware and instructions.

The Tannoy YOKE HORIZONTAL VX 8.2 accessory bracket provides tilt rotation in the long axis of VX 8.2 loudspeakers for accurate audience coverage and boasts a safety factor of 10:1 allowing unparalleled installation security.

Designed specifically for users seeking maximum control over the pan and tilt orientation of AMS 6 and AMS 8 Series surface-mount loudspeakers, the VARIBALL BRACKET AMS 6/8 is an ideal and cost-effective solution.

This wall bracket provides 0 – 10° of positive pitch retention for stacked Bose MA12 and MA12EX arrays. Load rated for triple-stacks. This bracket is used along with the WB-MA12/MA12EX pitch only or WMB-MA12/MA12EX bi-pivot brackets. For indoor/outdoor use.

The TOA SR-EP3 Extension Plate is used to link the linear type Line Array Speakers.

The Electro-Voice MB300 horizontal array kit contains two brackets and eight of each of the following: 5 / 16-18 x 1 hex-head bolts, 5 / 16 lock washers, 5 / 16-18 nuts. The MB300 is used in conjunction with the MB200 installation bracket to create a speaker array.

The Bose WMB-MA12/MA12EX Bi-Pivot Bracket offers pitch and yaw adjustment for MA12 and MA12EX loudspeakers. It is designed for indoor/outdoor use.