Wall Mount Brackets

The On Stage Stands SS7914B wall mount speaker bracket is ideal for sound contractors. Mount this bracket on walls at night clubs, recording studios, home multi-media rooms, schools or just about anywhere! With the included adapter sleeve, this wall mount makes for a universal fit: 1-3/8" - 1-1/2".

The all-steel On-Stage Stands SS7990 speaker wall mounts provide 180 degrees of steering, 80 lbs per mount capacity and comes complete with multiple tie points for tilting options, mounting hardware and instructions.

The Tannoy YOKE HORIZONTAL VX 8.2 accessory bracket provides tilt rotation in the long axis of VX 8.2 loudspeakers for accurate audience coverage and boasts a safety factor of 10:1 allowing unparalleled installation security.

Designed specifically for users seeking maximum control over the pan and tilt orientation of AMS 6 and AMS 8 Series surface-mount loudspeakers, the VARIBALL BRACKET AMS 6/8 is an ideal and cost-effective solution.

The Bose RMUBRKT1 RMU pan-and-tilt bracket attaches to the rear panel threaded inserts of all RoomMatch® Utility loudspeakers and the FreeSpace FS4SE speaker. It allows both pitch and yaw adjustments to enable flexible mounting options.

The Bose RMUBRKT1 RMU pan-and-tilt bracket attaches to the rear panel threaded inserts of all RoomMatch® Utility loudspeakers and the FreeSpace FS4SE speaker. It allows both pitch and yaw adjustments to enable flexible mounting options.

The TOA SR-TB3 is a wall tilt bracket designed to install the line array speaker flat against the wall. The downward angle can be set to 0°- 5° and the horizontal angle to up to 15°.

The Yamaha BWS251-400 is a wall mount bracket designed for the IF2208 and IF2205 speaker systems and allows for a greater tilt than the BWS251-300 .

Yamaha's BWS251-300 is a wall mount bracket designed for the IF2208 and IF2205 speaker systems.

The Bose WBPWR-50 is an outdoor rated pan-and-tilt bracket that attaches to the rear panel threaded inserts of the RMU208, RMU206 and RMU108 models, as well as the RMU105 and FreeSpace FS4SE speakers.

The Bose WBPWR-50 is an outdoor rated pan-and-tilt bracket that attaches to the rear panel threaded inserts of the RMU208, RMU206 and RMU108 models, as well as the RMU105 and FreeSpace FS4SE speakers.

The Yamaha UB-DZR10H U-bracket enables simple and easy rigging in horizontal configurations for DZR10, DZR10-D and CZR10 speakers.

The Yamaha UB-DZR10V U-bracket enables simple and easy rigging in vertical configurations for DZR10, DZR10-D and CZR10 speakers.

The Adaptive Technologies MM-022-BT universal MultiMount speaker mount supports loudspeakers weighing up to 60 lbs/27 kgs, quickly attaching them to walls, ceilings, overhangs, and other structural surfaces. - Speaker not included

The Yamaha UB-DZR12H U-bracket enables simple and easy rigging in horizontal configurations for DZR12, DZR12-D and CZR12 speakers.

The Yamaha UB-DZR12V U-bracket enables simple and easy rigging in vertical configurations for DZR12, DZR12-D and CZR12 speakers.

The TOA SR-TB4 wall tilt bracket mounts is ideal for indoor use. It is designed to be used exclusively to mount the SR-S4L or SR-S4S line array speaker on a wall. It allows the speaker orientation angle to be adjusted to 5° max. vertically and 20° max. horizontally.

The Yamaha UB-DZR15H U-bracket enables simple and easy rigging in horizontal configurations for DZR15, DZR15-D and CZR15 speakers.

The Yamaha UB-DZR15V U-bracket enables simple and easy rigging in vertical configurations for DZR15, DZR15-D and CZR15 speakers.

The Yamaha UB2112 speaker mounting U-bracket is designed for use with IF2112 speaker systems.