The Electro-Voice MB300 horizontal array kit contains two brackets and eight of each of the following: 5 / 16-18 x 1 hex-head bolts, 5 / 16 lock washers, 5 / 16-18 nuts. The MB300 is used in conjunction with the MB200 installation bracket to create a speaker array.

The array can be constructed in either of two angular configurations:

1. Speakers side by side (50° angle) for a tight array.

2. Speakers spread slightly (60° angle) for wider coverage.

Note that a full 360° array can only be accomplished with the 60° angle pattern. Suspension of the speaker array is made easy with the four 0.5" (12.7 mm) holes. A cable, chain quick link, or other suitable hardware which is rated for overhead lifting (not supplied with this kit) can be used to connect to the array for flying.

• Array kit for System 200 speakers
• Creates arrays of two to six speakers when used with the MB200 installation bracket
• 2 mounting angles: 50° and 60°
• Provides a rigid frame for arraying speakers from 1 to 2 levels

Manual