- Description
Details
The PGXD24/SM86 is Digital Handheld Wireless Microphone System. Includes PGXD4 Wireless Receiver and SM86 Handheld Microphones.
The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. True digital diversity means two antennas and two independent receivers are constantly working to provide rock-solid RF signal, and one touch scan finds a clear frequency instantly, making set up a snap.
The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering a clear, studio-quality sound.- Features
Features
- PGXD4 Features:
- 24-bit / 48kHz digital technology for incredibly accurate sound.
- Automatic frequency selection locates a clear channel instantly.
- One-touch sync automatically syncs the transmitter and receiver.
- True digital diversity for rock-solid wireless signal reliability.
- Up to 5 compatible channels per frequency band.
- 1/4" and XLR audio outputs.
- Included padded carrying case for portability and protection.
- SM86 features:
- Condenser cartridge for studio quality sound.
- Tailored frequency response for a clear reproduction of vocals.
- Rugged construction withstands the rigors of touring sound.
- Cardioid polar pattern minimizes unwanted background noise.
- Excellent choice for stage monitors and personal monitors.
- Built-in three-point shock mount minimizes handling noise.
- Two-stage "pop" filter reduces wind and breath noise.
- Specification
PGXD4 Audio Output Level XLR connector (into 3000 Ω load): -2.5 dBV, 1/4 inch connector (into 10000 Ω load): +10 dB Impedance XLR: 50 Ω,1/4 inch: 50 Ω Sensitivity -102 dBm @ 10-5 BER Image Rejection > 70 dB, typical Housing ABS XLR Output Impedance balancedPin 1: Ground (cable shield)Pin 2: AudioPin 3: No Audio Audio LED Red: 2 dB below clip, Amber: 12 dB below clip,Green: 50 dB below clip Power Requirements 12-18 Vdc at 150 mA, supplied by external power supply Pin Assignments XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4")TRS: Tip=audio, Ring=no audio,Sleeve=ground Dimensions (W x H x D) 7.125 in x 1.6 in x 4.1 in (181 mm x 40 mm x 104 mm) SM86 Transducer Type Condenser (electret bias) Frequency Response 50 to 18,000 Hz Polar Pattern Cardioid Output Impedance 150 Ohms at 1 kHz Sensitivity (at 1,000 Hz) Open Circuit Voltage: -50 dBV/Pa (3.15 mV) Output Clipping Level 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V) Maximum SPL (at 1,000 Hz) 1000 ohm load (1% THD): 147 dB Self-Noise 23 dB typical, A-weighted Dynamic Range (1000 ohms) 124 dB (maximum SPL to A-weighted noise level Signal-to-Noise Ratio 71 dB at 94 dB SPL (IEC 651) Power Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Connector Three-pin (XLR) professional audio Net Weight 0.61 lbs (278 g) - System Includes
System Includes
- (1) PGXD4 Receiver
- (1) PGXD2/SM86 Handheld Transmitter
- (1) Clip
- (1) Power Supply
- (2) AA Batteries
- (1) Carrying Case
- (1) User Guide
- Reviews
Write Your Own Review