- Description
Details
AUDIX MB8455W MICROBOOM WITH 84" BOOM AND M1255BW CARDIOID MICROPHONE
The MicroBoom™ System is produced in three lengths: 24", 50" and 84" and comes with a carbon fiber rod compatible with any of The Micros™. Lightweight, able to attach to any microphone stand, the MicroBoomTM is a problem solver for many hard-to-reach miking applications including choir, live theater and orchestra.
The MicroBoom™ can be used with any of the microphones in The Micros™ series providing a broad selection of pick-up patterns, output levels and frequency responses. A high quality shielded cable is used internally to insure the cleanest audio signal path between the microphone and the bottom of the boom. The stand adapter offers total control over the angle, rotation and position of the carbon fiber rod by way of a flexible metal gooseneck. The MicroBoom™ provides an ultra-clean, professional and elegant appearance on stage while providing exceptional performance and portability.
Stand Not Included.
- Features
Features
MB8455W:
- Lighweight, rigid
- Portable, easy to position
- Clean, elegant appearance
- Choice of capsules
- Exceptional sound quality
- No external power needed
- Attaches to any mic stand
- Can be used horizontally or vertically
M1255BW:
- Small, lightweight, low profile
- Miniaturized integrated preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high SPL handling
- Available with a cardioid, hypercardioid, omni or supercardioid capsule
- Specification
MB8455W Material Rod Carbon Fiber Gooseneck Steel Connectors Brass Connectors Bottom: Mini-XLR male Top: Mini-XLR female Finish White M1255BW Transducer Type Condenser Frequency Response 50 Hz - 19 kHz Polar Pattern Cardioid Output Impedance 150 ohms Sensitivity 32 mV / Pa @ 1k Signal/Noise Ratio (A-Weighted) 73 dB Equivalent Noise Level (A-Weighted) 21 dB Maximum SPL @ 0.5% THD ≥130 dB Dynamic Range 109 dB Power Requirements 18 – 52 V Connector 3 pin mini-XLRm Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 Housing / Finish Machined brass / Powder coat Dimensions MB8455W (Diameter x H) .20" (7.4 mm) x 84" (2134 mm) M1255BW (H) 2.1" (54 mm) Weight MB8455W (Without Mic or Clip) 4 oz (111 g) M1255BW 2" (7.4 mm) - In The Box
In The Box
- (1) 84" Carbon Fiber Boom
- (1) M1255BW Microphone
- (1) Clutch Assembly
- (1) High Quality 25' XLRM -Mini-XLRF Shielded Mic Cable
- (1) Windscreen
- Reviews
Write Your Own Review