- Description
Details
The PGXD2/SM86 is Digital Wireless Handheld Microphone Transmitter. Includes PGXD2 Handheld Transmitter and SM86 Handheld Microphones.With an interchangeable SM86 microphone cartridge, the PGXD2/SM86 transmits wireless audio with pure digital clarity and rock-solid reliability. Compatible with Shure microphones trusted by musicians for decades, including the legendary SM58, the PGXD2 transmits wireless audio with pure digital clarity and rock-solid reliability.
The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering a clear, studio-quality sound.- Features
Features
- PGXD2 Features:
- Power, mute, and battery status LED.
- Up to 9 hours of continuous use from 2 AA batteries.
- 200 ft (60 m) operating range.
- 10 dB of adjustable gain.
- Lockable interface prevents accidental setting changes.
- Rugged construction for reliable performance show after show.
- SM86 features:
- Condenser cartridge for studio quality sound.
- Tailored frequency response for a clear reproduction of vocals.
- Rugged construction withstands the rigors of touring sound.
- Cardioid polar pattern minimizes unwanted background noise.
- Excellent choice for stage monitors and personal monitors.
- Built-in three-point shock mount minimizes handling noise.
- Two-stage "pop" filter reduces wind and breath noise.
- Specification
PGXD2 Audio Input Level +5 dBV maximum at -10 dB gain position, –5 dBV maximum at 0 dB gain position Gain Adjustment Range 10 dB RF Output Level 10 mW maximum (dependent on applicable country regulations) Housing Molded PC/ABS handle and battery cup Power 2 AA size batteries Battery Life Up to 9 hours Dimensions 254 mm x 51 mm (10 x 2 in.) Weight 290 grams (10.2 oz.) without batteries SM86 Transducer Type Condenser (electret bias) Frequency Response 50 to 18,000 Hz Polar Pattern Cardioid Output Impedance 150 Ohms at 1 kHz Sensitivity (at 1,000 Hz) Open Circuit Voltage: -50 dBV/Pa (3.15 mV) Output Clipping Level 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V) Maximum SPL (at 1,000 Hz) 1000 ohm load (1% THD): 147 dB Self-Noise 23 dB typical, A-weighted Dynamic Range (1000 ohms) 124 dB (maximum SPL to A-weighted noise level Signal-to-Noise Ratio 71 dB at 94 dB SPL (IEC 651) Power Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Connector Three-pin (XLR) professional audio Net Weight 0.61 lbs (278 g) - Reviews
Write Your Own Review