- Description
Details
The Shure ULXD2 is a handheld wireless transmitter compatible with ULX-D™ Digital Wireless Systems. With a rugged yet lightweight aluminum body and integrated antenna, the ULXD2 delivers uncompromising audio quality and RF performance, AES 256-bit encryption for secure transmission and advanced rechargeability options for professional sound reinforcement applications.
Excellent for touring professionals, the Beta 87C premium vocal microphone delivers studio-grade performance and a smooth, extended high-end frequency response in a cardioid condenser design.
The microphone adds warmth to the frequency response and creates an ideal environment for in ear personal monitoring. And its highly consistent cardioid pattern offers excellent rear rejection.
Vocalists who use earphone monitor systems such as Shure PSM® will appreciate how effectively the BETA 87C rejects ambient sound from the rear of the microphone.- Features
Features
- ULXD2 Features:
- 30 Hz–20 kHz range with flat frequency response (actual response is microphone dependent).
- Interchangeable Shure microphone cartridges, including the legendary SM58.
- AES 256-bit encryption for applications for which secure transmission is needed.
- Proprietary Shure Gain Ranging optimizes the system’s dynamic range for any input source
- Shure Lithium-Ion rechargeable battery pack provides over 12 hours of battery life
- Precision metering in hours and minutes with 5 segment battery fuel gauge, and zero memory effect.
- External charging contacts for docked charging (with the SBC200 Dual Docking Charger).
- Backlit LCD with easy to navigate menu and controls.
- Rugged metal construction.
- Frequency and power lockout.
- Beta 87C Features:
- Smooth, wide frequency response, slight presence rise.
- Uniform cardioid polar pattern for maximum isolation.
- Minimum off-axis tone coloration.
- Low-frequency roll-off compensates for proximity effect.
- Three-stage pop filter minimizes breath pop and noise.
- Break-resistant stand adapter.
- Frequency response: 50 - 20,000 Hz.
- Specification
ULXD2 AUDIO INPUT Configuration Unbalanced Maximum Input Level (1 kHz at 1% THD) 145 dB SPL (SM58), typical Preamplifier Equivalent Input Noise (EIN) 120 dBV, A-weighted, typical RF OUTPUT Antenna Type Integrated Single Band Helical Occupied Bandwidth <200 kHz Modulation Type Shure Proprietary Digital Power 1 mW, 10 mW, 20 mW Audio Frequency Response 30 Hz to 20 kHz (±1 dB), flat Dynamic Range >120 dB Operating Range 300 ft (100 m) Gain Offset Range 0 to 21 dB (in 3 dB steps) Battery Type Shure SB900 Rechargeable Li-Ion or AA batteries Battery Runtime @ 10 mW Shure SB900: >12 hours Alkaline: 11 hours Housing Machined aluminum Dimensions 10.1" x 2.0" (256 mm x 51 mm) Weight 0.749 lbs (340 g), without batteries Beta 87C Transducer Type Condenser (electret bias) Frequency Response 50 to 20,000 Hz Polar Pattern Cardioid Output Impedance Rated at 150 ohms (100 Ohms actual +/- 20%) Sensitivity (at 1,000 Hz) Open Circuit Voltage: -51 dBV/Pa (2 mV) Output Clipping Level 1000 Ohm Load at 1,000 Hz: -6 dBV (0.5 V) Maximum SPL 139 dB at 1,000 Hz (0.25% THD, 1000 Ohm load) Self-Noise 22 dB typical, A-weighted24 dB typical, weighted per DIN 45 405 Dynamic Range 117 dB (maximum SPL to A-weighted noise level) Hum Sensitivity -5 dB equivalent SPL, maximum, in a 1 mOe field (60 Hz) Signal-to-Noise Ratio 72 dB at 94 dB SPL (IEC 651)* Power Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Connector Three-pin (XLR) professional audio Net Weight 0.456 lbs (207 grams) - Reviews
Write Your Own Review