- Description
Details
The Shure ULXD2 is a handheld wireless transmitter compatible with ULX-D™ Digital Wireless Systems. With a rugged yet lightweight aluminum body and integrated antenna, the ULXD2 delivers uncompromising audio quality and RF performance, AES 256-bit encryption for secure transmission and advanced rechargeability options for professional sound reinforcement applications.
The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering a clear, studio-quality sound.
A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise.- Features
Features
- ULXD2 Features:
- 30 Hz–20 kHz range with flat frequency response (actual response is microphone dependent).
- Interchangeable Shure microphone cartridges, including the legendary SM58.
- AES 256-bit encryption for applications for which secure transmission is needed.
- Proprietary Shure Gain Ranging optimizes the system’s dynamic range for any input source, eliminating the need for transmitter gain adjustments.
- Shure Lithium-Ion rechargeable battery pack provides over 12 hours of battery life, precision metering in hours and minutes with 5 segment battery fuel gauge, and zero memory effect.
- External charging contacts for docked charging (with the SBC200 Dual Docking Charger).
- Backlit LCD with easy to navigate menu and controls.
- Rugged metal construction.
- Frequency and power lockout.
- SM86 Features:
- Condenser cartridge for studio quality sound.
- Tailored frequency response for a clear reproduction of vocals.
- Rugged construction withstands the rigors of touring sound.
- Cardioid polar pattern minimizes unwanted background noise.
- Excellent choice for stage monitors and personal monitors.
- Built-in three-point shock mount minimizes handling noise.
- Two-stage "pop" filter reduces wind and breath noise.
- Specification
ULXD2 AUDIO INPUT Configuration Unbalanced Maximum Input Level (1 kHz at 1% THD) 145 dB SPL (SM58), typical Preamplifier Equivalent Input Noise (EIN), System Gain Setting = +20 120 dBV, A-weighted, typical RF OUTPUT Antenna Type Integrated Single Band Helical Occupied Bandwidth <200 kHz Modulation Type Shure Proprietary Digital Power 1 mW, 10 mW, 20 mW ADDITIONAL SPECS Audio Frequency Response 30 Hz to 20 kHz (±1 dB), flat Dynamic Range >120 dB Operating Range 300 ft (100 m) Gain Offset Range 0 to 21 dB (in 3 dB steps) Battery Type Shure SB900 Rechargeable Li-Ion or AA batteries Battery Runtime @ 10 mW Shure SB900: >12 hours Alkaline: 11 hours Housing Machined aluminum Dimensions 10.1" x 2.0" (256 mm x 51 mm) Weight 0.749 lbs (340 g), without batteries SM86 Transducer Type Condenser (electret bias) Frequency Response 50 to 18,000 Hz Polar Pattern Cardioid Output Impedance 150 Ohms at 1 kHz Sensitivity (at 1,000 Hz) Open Circuit Voltage: -50 dBV/Pa (3.15 mV) Output Clipping Level 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V) Maximum SPL (at 1,000 Hz) 1000 ohm load (1% THD): 147 dB Self-Noise 23 dB typical, A-weighted Dynamic Range (1000 ohms) 124 dB (maximum SPL to A-weighted noise level Signal-to-Noise Ratio 71 dB at 94 dB SPL (IEC 651) Power Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Connector Three-pin (XLR) professional audio Case Dark gray enamel-painted steel with matte-finished silver colored steel grille Net Weight 0.612 lbs (278 grams) - Reviews
Write Your Own Review