Problem:

How do you connect a CD player, a synthesizer and the line output from a bass amp to a tape deck?

Solution:

Use a simple stereo mixer. The PowerMIX III can accept either mono or stereo signals and mixes them down to stereo or identical L/R mono signals.

Additionally, the PowerMIX III provides a headphone output with its own level control.

Usage:

1. Plug the AC adapter into the 12V DC input on the PowerMIX III and plug the other end into a 120V AC wall socket.

2. Plug your stereo signal sources into the separate L/R Inputs on channels 1 to 3. Mono sources can be plugged into the Left Input on any channel. It is not recommended that you connect 2 mono sources to any one channel.

• Three input channels each with their own pan and level controls
• Three sets of 1/4" left and right unbalanced inputs
• The Right inputs may be used for mono signals
• A Master Level control regulates all 3 channels
• Left and Right unbalanced 1/4" Outputs
• The Headphone channel features dual, stereo 1/4" outputs so that two headsets can be connected at once
• The Headphone Level control regulates both outputs
• Power: 12V DC (Adapter included)