- Description
Details
Two Fast Recovery™ amplifiers independently power a 12-inch lightweight woofer and a precision titanium compression driver. Mackie’s sophisticated Active electronics provide phase correction, crossover, time correction, equalization, and protection circuitry.
A heat-treated titanium compression driver with multi-cell aperture directs pristine highs through an exponential high-frequency waveguide, allowing for ultra-wide dispersion. This allows the SRM450 to deliver clear, smooth sound to audience members up to 45° off axis.
The 12-inch lightweight woofer provides a greater magnetic field with far less material, making the woofer extremely lightweight without sacrificing performance. The 3-inch voice coil allows the driver to run cooler, delivering consistent performance even after long hours of use.
Mackie-designed Active electronics provide equalization, crossover, time alignment, and phase correction to enhance sonic performance. Protective circuitry includes over-excursion protection, low-line voltage shut-down, thermal protection, level dependent low-frequency roll-off and independent LF and HF limiters.
The SRM450 features a number of dedicated controls including a mic/line switch, a single microphone and line input level control, and a contour switch for low-level sound reinforcement applications. There is also a timed turnoff feature that turns off the amplifiers if the signal drops below –45 dBu for three minutes.
The center of gravity, handle locations, handle design, position of fly-points and ease of use have been ergonomically designed. There is also an integrated pole mount cup and a weather resistant steel grille. The asymmetrical trapezoidal cabinet has been designed to provide an ideal floor monitoring position.
The cabinet is constructed of high-pressure injected polypropylene. The enclosure features ample amounts of reinforcement ribbing and structural strengthening resulting in a strong, super-rigid design providing ideal acoustical characteristics.- Features
Features
- 1000W system power paired with custom transducers deliver gig-level volumes with room to spare
- 12" high-output LF driver
- 1.4" titanium dome compression driver
- High-Definition Audio Processing for professional sound with unmatched clarity
- Patented acoustic correction developed with touring geniuses at EAW®
- Precision 2-way crossover
- Driver time alignment and phase correction
- Quick one-button Speaker Mode selection for application-specific voicing (PA, DJ, Monitor and Soloist)
- Effortlessly eliminate nasty feedback with one-button automatic Feedback Destroyer
- Integrated 2-channel mixer featuring dual Wide-Z™ inputs
- Handles anything from mics to guitars to mixers with a single twist of the gain knob
- Includes stereo RCA inputs for easy connection to music source
- Perfect for the singer/songwriter, plug in and leave the mixer at home
- Smart Protect™ DSP kicks in to protect your investment when things get pushed a little too hard
- Monitor-specific angle and voicing mode perfect for cutting through on stage
- Flyable for permanent install
- Proven highly-durable, portable design
- Specification
Acoustic Performance Frequency Response (–3 dB) 47 Hz – 20 kHz Frequency Range (–10 dB) 42 Hz – 23 kHz Max Peak SPL 128 dB Crossover Point 3k Hz Dispersion (H x V) 90º x 45º High-Frequency Section Compression Driver 1.4" (36 mm) Diaphragm Material Titanium Magnet Material Ferrite Low-Frequency Transducer Diameter 12" (305 mm) Cone Material Paper Magnet Material Ferrite Power Amplifiers High-Frequency Power Amplifier Rated Power 100W rms
200W peakRated THD < 1% Cooling Convection Design Class AB Low-Frequency Power Amplifier 400W rms
800W peakRated Power Rated THD < 1% Cooling Convection Design Class D Input / Output Channel 1 Mic Line: 8k ohms balanced
1/4" TRS, Wide-Z ™: 1M ohms unbalancedChannel 2 Mic Line: 8k ohms balanced
1/4" TRS, Wide-Z ™: 1M ohms unbalanced
RCA: 25k ohms unbalancedThru Passive when the Ch 1 / Mix switch is in the "out" (Ch 1) position
Active when the Ch 1 / Mix switch is in the "in" (Mix) positionDimensions (H x W x D) Speaker 26.1" (663 mm) x 16" (406 mm) x 14.8" (376 mm) Shipping 29" (737 mm) x 17.5" (445 mm) x 17" (432 mm) Weight Net 37 lbs (16.8 kg) Shipping 43 lbs (19.5 kg) - Documents
Documents
- Reviews
Write Your Own Review